Nokia 002Q942 User Manual page 19

3. If you select Bluetooth connectivity as the connection
type, connect the two devices. To have your device
search for devices with Bluetooth connectivity, select
Continue. Select the device from which you want to
transfer content. You are asked to enter a code on your
device. Enter a code (1-16 digits), and select OK. Enter
the same code on the other device, and select OK. The
devices are now paired.
Some earlier Nokia devices may not have the Switch
application. In this case, the Switch application is sent
to the other device as a message. To install the Switch
application on the other device, open the message, and
follow the instructions on the display.
4. On your device, select the content you want to transfer
from the other device.
When the transfer has started, you can cancel it and
continue later.
Content is transferred from the memory of the other
device to the corresponding location in your device. The
transfer time depends on the amount of data to be
transferred.
Synchronise, retrieve, or send
content
Select Menu Ctrl. panel
>
After the first transfer, select from the following to start a
new transfer, depending on the model:
to synchronise content between your device and the
other device, if the other device supports synchronisation.
The synchronisation is two-way. If an item is deleted in
> Switch.
one device, it is deleted in both. You cannot restore
deleted items with synchronisation.
to retrieve content from the other device to your
device. With retrieval, content is transferred from the
other device to your device. You may be asked to keep or
delete the original content in the other device, depending
on the device model.
to send content from your device to your other device
If you cannot send an item, depending on the type of the
other device, you can add the item to the Nokia folder, to
C:\Nokia or E:\Nokia in your device. When you select the
folder to transfer, the items are synchronised in the
corresponding folder in the other device, and vice versa.
Use shortcuts to repeat a transfer
After a data transfer, you can save a shortcut with the
transfer settings to the main view to repeat the same
transfer later.
To edit the shortcut, select
settings. For example, you can create or change the name
of the shortcut.
A transfer log is shown after every transfer. To view the
log of the last transfer, select a shortcut in the main view
and Options View log.
>
Handle transfer conflicts
If an item to be transferred has been edited in both
devices, the device attempts to merge the changes
automatically. If this is not possible, there is a transfer
conflict. Select Check one by
phone, or Priority to other phone
Options Shortcut
>
one, Priority to this
to solve the conflict.
19