Call Costs; Data Counter (Tab 2: Call) - Sharp 880SH User Manual

Call Costs

(M 9-6)
This function lets you check the charges for your calls.
Some networks do not support Charging Advice. Please
check with your service provider for availability.
Checking the Cost of the Last Call
→
"Telephony" "Call Log" tab
"Last Call"
Checking the Total Call Cost
→
"Telephony" "Call Log" tab
"All Calls"
Setting the Charge Rate
Set the charge rate to calculate the call cost and set the
maximum limit for call cost.
→
"Telephony" "Call Log" tab
→
"Cost Units" "Set Units"
1.
Enter your PIN2 code.
2.
Enter a currency unit (up to 3 characters).
3.
Enter a cost per unit.
To enter a decimal point, press P.
Setting the Charge Limit
This function is useful if you wish to make sure you do
not exceed a certain charge limit.
158 Telephony
(M 9-6-1)
→ →
"Call Costs"
(M 9-6-2)
→ →
"Call Costs"
(M 9-6-5)
→ →
"Call Costs"
(M 9-6-6)
→
"Telephony" "Call Log" tab
→
"Max Cost" "Set Limit"
1.
Enter your PIN2 code.
2.
Enter a value.
Checking the Residual Credit
→
"Telephony" "Call Log" tab
"Residual Credit"
Resetting All Call Costs
→
"Telephony" "Call Log" tab
"Clear Costs"
1.
Enter your PIN2 code.
Data Counter (M 9-7)
You can confirm the number of bytes used in the 3G
(UMTS) and GSM transmission.
→
"Telephony" "Call Log" tab
1.
Select from "Last Data" or "All Data".
Resetting All Data Counter
→
"Telephony" "Call Log" tab
"Clear Counter"
→ →
"Call Costs"
(M 9-6-3)
→ →
"Call Costs"
(M 9-6-4)
→ →
"Call Costs"
→
"Data Counter"
(M 9-7-3)
→ →
"Data Counter"