Sharp 880SH User Manual page 153

To Select a Network Automatically
Each time the power is turned on, your phone always
tries to connect to the preferred network.
If your phone is not connected to the network, you can
perform the following immediately to establish the
preferred network connection.
→
"Settings" "Other Settings" tab
→
Settings" "Select Network"
To Select the Network Manually
→
"Settings" "Other Settings" tab
→
Settings" "Select Network"
1.
Select the desired network.
To Add a New Network
→
"Settings" "Other Settings" tab
→
Settings" "Select Network"
Network"
If there are no entries, press B and go to step 2.
If there is an entry, press B and perform the following
steps.
1.
Select "Add".
2.
Enter the country code (up to 3 digits).
3.
Enter the network code (up to 3 digits).
4.
Enter a new network name (up to 25 characters).
5.
Enter either 2G (GSM) or 3G for the network type.
152 Settings
→
"Network
→
"Automatic"
→
"Network
→
"Manual"
→
"Network
→
"Add New
To Edit the Preferred List
→
"Settings" "Other Settings" tab
→
Settings" "Select Network"
1.
Select the name of the network you wish to edit.
2.
Select "Insert" to insert over the selected position,
"Add to end" to insert at the end or "Delete" to
delete.
To Set Flight Mode (M 12-d-d-d-5-3)
When the Flight Mode is set to "On", the phone cuts off
the network connections and stops searching for
available networks to connect. With this mode, you can
play games or music even when you fly.
→
"Settings" "Other Settings" tab
→
Settings" "Flight Mode"
1.
Select "On" or "Off".
→
"Network
→
"Set Preferred"
→
"Network