Sharp 880SH User Manual page 148

Note
• You can search for devices even when the Bluetooth
wireless function is off. Once pairing is started, the
phone turns the Bluetooth wireless function on
automatically.
• You can only select one device for pairing. To change
the paired device, see "To Activate the Paired
Device".
• Pairing means authentication has been established
between the two devices.
• In order to pair two devices with Bluetooth wireless
technology, the users should agree on the same
passcode for both devices.
• The passcode is used only once, so there is no need to
remember it. The passcode can be different each time
the devices are connected.
• Devices that do not have a user interface (i.e.,
headsets and car kits) have a factory-set passcode.
See the user guide for the device.
Tip
• You can save battery power by turning the Bluetooth
wireless function off while it is not in use. Turn the
Bluetooth wireless function off in "To Turn On or Off
the Bluetooth Wireless Function" on page 146 or in
"To Turn Off Automatically" on page 149.
• During a call, you can divert voice calls to the paired
handsfree device. Press [Options], select "Transfer
Audio" and then "To Handset" or "To Bluetooth".
To Activate the Paired Device
Paired devices are listed by tabs for all devices for
handsfree devices and for Audio devices.
→
"Settings" "Connectivity" tab
"Paired Devices"
Press d to switch to the list for handsfree devices.
1.
2.
Select the desired device you wish to activate.
To Check the Paired Handsfree Devices
→
"Settings" "Connectivity" tab
"Paired Devices"
Press d to switch to the list for handsfree devices.
1.
2.
Highlight the desired handsfree device.
Press B to check the handsfree device.
3.
(M 12-d-d-1-4)
→ →
"Bluetooth"
→ →
"Bluetooth"
Settings 147