Subscribe to Our Youtube Channel
Related Manuals for Shark NZ700 Series
Summary of Contents for Shark NZ700 Series
- Page 1 Lift-Away with Anti Hair Wrap Plus and Anti-Odour Technology Upright Vacuum NZ700 Series OWNER’S GUIDE...
-
Page 2: Table Of Contents
Important Safety Instructions � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4 Getting to Know Your Shark® Lift-Away � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 6... -
Page 3: Important Safety Instructions
If this dust collection. occurs, immediately shut off power to the 13 Only use Shark® branded filters and b) Eye contact: Remove contact lenses if vacuum and remove the cord. present. Rinse continuously with water accessories. - Page 4 GETTING TO KNOW YOUR SHARK CORDED UPRIGHT VACUUM WITH LIFT-AWAY TECHNOLOGY AND ANTI HAIR WRAP PLUS BRUSHROLL� WELCOME! Congratulations on your purchase. Use this instruction manual to learn about your new vacuum’s great features. From assembly to use to maintenance, you will find it all in here.
-
Page 5: Assembly
ASSEMBLY ASSEMBLY (Click) (Click) Upper Cord Hook (Turn to Tool Storage Click) Posts Lower Cord Hook (Click) (Click) POWER CORD 1. Place Pod down onto Nozzle. 2. Insert Wand into Pod. 3. Insert Handle into wand� 4. Attach Hose to back of pod� 5. -
Page 6: Anti-Odour Technology
TECHNOLOGY SETTINGS ANTI-ODOUR TECHNOLOGY SETTINGS ODOUR CARTRIDGE REPLACEMENT 1. REMOVE ODOUR DIAL 2. REMOVE OLD ODOUR FROM NOZZLE CARTRIDGE ODOUR DIAL Flip up the handle and rotate the dial clockwise Rotate the cartridge counterclockwise Flip up the dial handle and rotate the Odour dial until the two teal arrows are aligned�... -
Page 7: Whole Home Cleaning
WHOLE-HOME CLEANING WHOLE-HOME CLEANING SETTINGS CLEANING MODES POWER/SURFACE SWITCH SUCTION CONTROL UPRIGHT MODE LIFT-AWAY MODE Select surface setting: The Suction Control Slider located on the To engage Brushrolls, select a Step on the pedal on the floor handle allows you to adjust the suction surface setting, step on floor nozzle nozzle to lift off the pod�... -
Page 8: Emptying The Dust Cup
EMPTYING THE DUST CUP CLEANING THE FILTERS IMPORTANT: Unplug the power cord before performing any maintenance� Regularly rinse and replace the filters to maintain your vacuum's suction power and to maximize the effectiveness of the Anti-Odour Technology. Rinse filters with cold water only� Allow all filters to air-dry for at least 24 hours before Empty the dust cup each time you vacuum and periodically during cleaning, reinstalling them to prevent liquid from being drawn into electronic parts�... -
Page 9: Cord Maintenance
MAINTENANCE CHECKING FOR BLOCKAGES NOZZLE MAINTENANCE ANTI HAIR WRAP PLUS If any hair is wrapped around the brushroll, continue vacuuming, using Carpet/Low Pile mode on a bare floor surface, a low-pile carpet, or a small area rug� This will allow the self-cleaning brushroll to remove the hair wrap and send it to the dust cup�... -
Page 10: Available Accessories
AVAILABLE ACCESSORIES TROUBLESHOOTING Power cord caught in brushrolls or floor nozzle� Crevice Tool • To minimize the risk of power cord damage, DO NOT run the vacuum over the power cord� This slender tool offers extended reach to If this occurs, immediately shut off power to the vacuum and remove the cord from the access corners, baseboards, tight spaces, and ceilings�... - Page 11 When you register your guarantee we’ll have your details to hand if we ever need to get in touch. You can also receive tips and advice on how to get the best out of your Shark® vacuum and hear the latest news about new Shark ®...
- Page 12 PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE� This Owner’s Guide is designed to help you get a complete understanding of your new Shark Lift-Away with Anti-Hair Wrap Plus and Anti-Odour Technology Upright Vacuum� Illustrations may differ from actual product� We are constantly striving to improve our products; therefore the specifications contained herein are subject to change without notice�...
Need help?
Do you have a question about the NZ700 Series and is the answer not in the manual?
Questions and answers