29 Allow all filters to air-dry completely at all times to avoid damaging the 13 Only use Shark ® branded filters and before replacing in the vacuum to carpet fibres.
Page 4
GETTING TO KNOW YOUR SHARK® CORDED UPRIGHT VACUUM WITH LIFT-AWAY TECHNOLOGY AND ANTI HAIR WRAP BRUSH-ROLL� WELCOME! Congratulations on your purchase. Use this instruction manual to learn about your new vacuum’s great features. From assembly to use to maintenance, you will find it all in here.
ASSEMBLY ASSEMBLY (Click) Upper Cord Hook (Click) Tool Storage Posts Lower Cord Hook (Click) POWER CORD 1. Insert Wand into pod 2. Insert Handle into wand� 3. Attach Hose to back of vacuum pod� NOTE: Ensure all parts firmly CLICK into place before operating� UPPER CORD HOOK CORD HOLDER For cord access, rotate upper hook down...
SETTINGS CLEANING MODES POWER/SURFACE SWITCH SUCTION CONTROL UPRIGHT MODE LIFT AWAY MODE The Suction Control Slider located on the To engage brush-roll, step on floor nozzle Select surface setting: Step on the pedal on the floor nozzle to lift handle allows you to adjust the suction and tilt handle back firmly�...
EMPTYING THE DUST CUP MAINTENANCE IMPORTANT: Unplug the power cord before performing any maintenance� CLEANING THE FILTERS Regularly rinse the filters to maintain your vacuum's suction power. Rinse filters with cold water only� Allow all filters to air-dry for at least 24 hours before reinstalling them to prevent liquid from being drawn into electronic parts�...
MAINTENANCE AVAILABLE ACCESSORIES CHECKING FOR BLOCKAGES Crevice Tool Clean tight spaces, reach skirting boards IMPORTANT: Unplug the cord before performing any maintenance� and ceilings with this slim crevice tool� Upholstery Tool Remove pet hair and dust from curtains and other delicate fabrics and upholstery� Dusting Brush Dusts and cleans a multitude of delicate surfaces�...