Advertisement
Quick Links
Advertisement
Related Manuals for Force UFO 6000
Summary of Contents for Force UFO 6000
- Page 1 USER MANUAL...
-
Page 2: Warnings And Safety Precautions
WARNINGS AND SAFETY PRECAUTIONS Note: According to Part 15 or the FCC Rules, this device 14. In order to comply with the command of the 15. Always fly the drone back when the battery is has been tested and meets the limits or Class B digital magnetic environment requirements of the Aviation running low. -
Page 3: Drone Battery Charging
BOX CONTENTS DRONE BATTERY CHARGING 1. Attach the USB cable to the battery then plug the 2. When the battery is charging, the USB indicator USB into your preferred charging source. light will be on. When the battery is fully charged, the USB indicator light will turn off. The battery charging time is approximately 120 minutes. UFO5000 DRONE 2 x MODULAR BATTERIES 4 x PROPELLERS SPANNER (2 x A & 2 x B) CHARGER CAR CHARGER COMPUTER POWER BANK Drone Battery USB Charging Cable Charging Sources TRANSMITTER USB CHARGER SCREWDRIVER... -
Page 4: Transmitter Overview
TRANSMITTER OVERVIEW DRONE ASSEMBLY BATTERY INSTALLATION BATTERY REMOVAL ON/OFF Place the battery on the center underside of the Turn off the drone before removing the battery. drone and slide the battery into place (Fig.1). Press and hold the tab circled in (Fig.2). Slide the Ensure the battery is firmly installed so it won’t fall battery to the right side to release it from the drone. SPEED MODE BUTTON LED MODE BUTTON out during flight. LONG PRESS: AUTOROTATION LONG PRESS: 360° FLIP FORWARD/BACKWARD THROTTLE ROTATE LEFTWARD/RIGHTWARD PRESS AND LEFT/RIGHT HOLD THE TAB AND MOVE THE BATTERY TO THE RIGHT SIDE Fig.1 Fig.2 PROPELLER INSTALLATION/REMOVAL 1-KEY LIFT/LAND HEADLESS MODE (LONG PRESS DIRECTION TRIM) (LONG PRESS: EMERGENCY STOP) -
Page 5: Flight Controls
QUICK-START GUIDE FLIGHT CONTROLS • Insert the drone battery and turn the drone on HOVER UP AND DOWN FLY FORWARD OR FLY LEFT OR RIGHT ROTATE LEFT OR RIGHT by pressing and holding the power button on the BACKWARD bottom of the drone. •... -
Page 6: Trim Adjustments
TRIM ADJUSTMENTS FUNCTIONS Long press the button pointed out on the ONE KEY LIFT/LAND FORWARD/BACKWARD TRIM transmitter in (Fig.9) to adjust trim. When your Place the drone on a flat surface. Press the 1-Key When the drone drifts forward while flying press drone drifts in an unwanted direction, long press Lift/Land Button (Fig.11)-the drone propellers will and hold the DIRECTION TRIM button and push the the DIRECTION TRIM button (Fig.9/10) and move... - Page 7 FUNCTIONS FUNCTIONS ROTATION Fig.13 HEADLESS MODE Long press the rotation button to start the Headless Mode allows you to fly your drone without knowing its automatic rotation function (Fig.13). If you want to orientation, because it will be fixed in the direction you set it. end the rotation, just push the direction control stick. Press the Headless Mode button to enter Headless Mode before Note: take off (Fig.15). The remote control will beep continuously and • Only execute rotations when you have plenty of the drone lights will begin to flash to indicate mode selection.
- Page 8 APP CONTROL GUIDE APP CONTROL GUIDE WIFI CAMERA CONNECTION Open the WIFI option, find the WIFI name “UFO6000” in the WIFI list and connect it. After the connection is successful, open the drone App and enter into the program to fly. *Reminder: When the drone is in a low power state, the light of drone flashes red, and the APP cannot control the drone. UFO PLAY APP CODE Please fully charge the battery first.
-
Page 9: Troubleshooting Guide
TROUBLESHOOTING GUIDE Problem Reason Solution Problem Reason Solution The LED indicator on the drone The remote control and the Refer to page 8 to pair again. The drone shakes or tilts The propellers are damaged. Replace the damaged flashes continuously after drone are not paired. sideways during flight. propeller(s). connecting the battery, there The drone continues to spin 1. - Page 10 LEARN MORE ABOUT FORCE1 www.force1rc.com...
Need help?
Do you have a question about the UFO 6000 and is the answer not in the manual?
Questions and answers