Wireless Lan - Nokia 002J3H5 - E63 Smartphone 110 MB User Manual

Connectivity > Bluetooth, and open the paired devices tab.
Scroll to the car kit, press the scroll key, and enter the
Bluetooth passcode. When the device asks to make the
connection automatic, select Yes. If you select No, connection
requests from this car kit must be accepted separately every
time.
To end the remote SIM access connection from your device,
select Menu Connectivity
>
mode > Off.

Wireless LAN

Note: Using WLAN may be restricted in some countries.
For example, in France, you are only allowed to use WLAN
indoors. For more information, contact your local authorities.
Your device can detect and connect to a wireless local area
network (WLAN). To use a WLAN, a network must be available
in the location and your device must be connected to it.
WLAN connections
Important: Always enable one of the available
encryption methods to increase the security of your wireless
LAN connection. Using encryption reduces the risk of
unauthorised access to your data.
To use WLAN, you must create an internet access point in a
WLAN. Use the access point for applications that need to
connect to the internet. A WLAN connection is established
© 2010 Nokia. All rights reserved.
Bluetooth Remote SIM
> >
when you create a data connection using a WLAN access
point. The active WLAN connection is ended when you end
the data connection. You can also end the connection
manually. See "Connection manager", p. 99.
You can use WLAN during a voice call or when packet data is
active. You can only be connected to one WLAN access point
device at a time, but several applications can use the same
internet access point.
When the device is in the Offline profile, you can still use
WLAN, if available. Remember to comply with any applicable
safety requirements when establishing and using a WLAN
connection.
If you move the device to another location within the WLAN
and out of range of a WLAN access point, the roaming
functionality can automatically connect your device to
another access point that belongs to the same WLAN. As long
as you remain within range of access points that belong to
the same network, your device can stay connected to the
network.
Tip: To check the unique media access control (MAC)
address that identifies your device, for example to
configure the MAC address of your device to a WLAN
router, enter *#62209526# on the device keypad. The
MAC address is shown on the device display.
See WLAN availability
To have your device show WLAN availability, select
Tools Settings Connection
> >
WLAN availability.
If WLAN is available, is shown on the display.
Menu
>
Wireless LAN Show
> >
97