Connect Pc To Web - Nokia 002J3H5 - E63 Smartphone 110 MB User Manual

WLAN security settings
•
for the selected security mode.
Homepage — Enter the web address of the page you
•
want to display as the home page when you use this
access point.
To set up a WLAN access point automatically, use the WLAN
wizard. Select Menu Connectivity
>
Advanced access point settings
for WLAN
Select Menu Tools
> >
points.
After setting up a basic access point for WLAN, select
Options Advanced settings, and define the following
>
advanced settings:
IPv4 settings — Enter the device IP and name server
•
addresses for the IPv4 internet protocol.
IPv6 settings — Select or enter the name server addresses
•
for the IPv6 internet protocol.
Ad-hoc channel — The channel is usually chosen
•
automatically. To enter the channel number (1-11)
manually, select User
Proxy server address
•
Proxy port number — Enter the proxy server port
•
number.
© 2010 Nokia. All rights reserved.
— Edit the security settings
WLAN wiz..
>
Settings Connection
>
defined.
— Enter the proxy server address.

Connect PC to web

You can use your device to connect your PC to the web.
1. Connect the data cable to the USB connectors of your
device and your PC.
2. Select Connect PC to
automatically installed from your device to the PC.
3. Accept the installation in your PC. Accept also the
connection, if prompted. When the connection to the web
is established, the web browser of your PC opens.
You must have administrator rights to your PC, and the
Access
> autorun option enabled in the PC.
web. The necessary software is
65