Table of Contents
Advertisement
M e s s a g i n g
Read and reply to a multimedia message
Important: Exercise caution when opening messages. E-mail messages or multimedia message objects may contain
malicious software or otherwise be harmful to your device or PC.
1. To view the received message, select Show. To view it later, select Exit.
2. To view the whole message if the received message contains a presentation, select Play. To view the files in the presentation
or the attachments, select
3. To reply to the message, select
4. Create the reply message.
5. To send the message, select Send.
Message sending process
To send the message, select Send. The phone saves the message in the
Note: Your device may indicate that your message was sent to the message center number programmed into your
device. Your device may not indicate whether the message is received at the intended destination. For more details
about messaging services, contact your service provider.
If an interruption occurs while the message is being sent, the phone tries to resend the message a few times. If these attempts
fail, the message remains in the
message, and select
Options
Postcards
With the postcard messaging service (network service), create and send postcards that may contain an image and a greeting
text. The postcard is sent to the service provider using multimedia messaging. The service provider prints the postcard and
sends it to the postal address given with the message. MMS must be activated before this service can be used.
Before you can use the postcard service, you must subscribe to the service. To check the availability and costs and to subscribe
to the service, contact your network operator or service provider.
To send a postcard, select
Menu
marked by a *. Scroll to the image field, select
then write your greeting text. To send the message, select Send.
Flash messages
Flash messages are text messages that are instantly displayed upon reception. Flash messages are not automatically saved.
Write a flash message
Select
Menu
Messaging
>
>
The maximum length of a flash message is 70 characters. To insert a blinking text into the message, select
blink charact.
to set a marker. The text after the marker blinks. To end the blinking text range, insert a second marker.
Read and reply to a flash message
A received flash message is indicated with
To read the message, select Read.
To extract numbers and addresses from the current message, select
To save the message, select
Save
Nokia Xpress audio messaging
You can use the MMS to create and send a audio message in a convenient way. MMS must be activated before you can use audio
messages.
Create a message
1. Select
Menu
Messaging
>
2. Speak your message.
3. Enter one or more phone numbers in the
4. To send the message, select Send.
© 2007 Nokia. All rights reserved.
Options
Objects
or Attachments.
>
Options
Reply
and the message type.
>
See "Message sending process," p. 16.
Outbox
folder. To cancel the sending of the messages in the
Cancel
sending.
>
Messaging
Create message
>
>
Insert
and an image from the gallery, or
Create message
Flash
message. Enter the recipient's phone number and write your message.
>
Message:
and a few words from the beginning of the message.
and the folder in which you want to save it.
Create message
Audio
>
>
To:
field, or select
Outbox
folder, and the sending starts.
> Postcard. Fill in the address; mandatory editor fields are
New image
Options
Use
detail.
>
message. The voice recorder opens.
Add
to retrieve a number.
16
Outbox
folder, scroll to the desired
to insert a recent image;
Options
Insert
>
See "Voice recorder," p. 32.
Free Datasheet http://www.datasheet4u.com/
Advertisement
Table of Contents
