Caller Id; Call Waiting - HTC Arrive Sprint Basic Manual

Caller ID

Caller ID identifies a caller before you answer the
device by displaying the number of the incoming call. If
you do not want your number displayed when you
make a call, follow these steps.
1. On the Start screen, tap
application.
2.
Tap to display the dial keypad.
3.
Tap .
4.
Enter a phone number.
5.
Tap call .
To permanently block your number, call Sprint
Customer Service.
to open the Phone

Call Waiting

When you're on a call, Call Waiting alerts you to
incoming calls by sounding two beeps. Your device's
screen informs you that another call is coming in and
displays the caller's phone number (if it is available and
you are in digital mode).
To respond to an incoming call while you're on a call:
Tap . (This puts the first caller on hold and
answer
answers the second call.)
To switch back to the first caller:
If you see a "TAP TO SWAP" notification message
at the top of the screen, tap that message.
– or –
Tap and then tap the
Tip:
For those calls where you don't want to be interrupted,
you can temporarily disable Call Waiting by pressing 
before placing your call. Call Waiting is
automatically reactivated once you end the call.
8. Sprint Service: The Basics
flash button.
63