Displaying Your Phone Number - HTC Arrive Sprint Basic Manual

Always use a Sprint-approved or HTC-approved
desktop charger, travel charger, or vehicle power
adapter to charge your battery.
Tip:
With the Sprint-approved Li-ion battery, you can recharge
the battery before it becomes completely run down.
1. Insert the small end of the USB cord into the
charger/accessory jack on the lower left side of
your device.
2.
Insert the larger end of the USB cord into the AC
adapter.
3.
Plug the AC adapter in to an electrical outlet to
start charging the battery.
While the battery is charging, you will see a solid red
Notification LED. If the device is on and not in sleep
mode, you will also see the charging battery icon
( ). Once fully charged, you will see a solid green
Notification LED and a full battery icon (
status bar.
10 1. Device Basics

Displaying Your Phone Number

Tap
then tap
information:
Setting
My phone number
Voicemail number
International assist
Long tones
) in the
on the Start screen, tap
Phone
call settings . You'll see the following
Displays your phone number
Shows the current voicemail
service being used. Tap to change
the voicemail number.
Turn international assist on or off.
Turn long tones on or off.
, and
Description