Haier CM200 User Manual page 15

1.Click New and the Write SMS interface is displayed;
2.Enter the telephone number(s) by one of the following ways:
To enter one or more number directly: In the Contacts textbox, enter the
numbers separated by semicolons
To select a number from the Contacts: Click
contact(s) and click
dialog box and click
3.Input the message. The maximum length of each message is 160 characters.
4.Click Send to send message.
After the message is sent successfully, it is automatically saved to the Outbox. If
the message is sent unsuccessfully, you are prompted whether to send it again. If
you cancel the sending, the message is saved to Outbox.
Click Save to save message to the Draft.
Click Clear to clear the message content.
Click Template
Note: The CM200 supports to send a message to a group of up to 20 numbers.
When your message contains no more than 160 characters, it is sent as
OK . Select the number to send a message in the pop-up
OK .
to insert template.
Contacts . Select one or more