Download Print this page

Haier CE100 User Manual

Tata photon+.
Hide thumbs

Advertisement

Haier CE 100
1

Advertisement

   Related Manuals for Haier CE100

   Summary of Contents for Haier CE100

  • Page 1

    Haier CE 100...

  • Page 2: Table Of Contents

    Table of Contents Product Features ..................................3 Know Your Device ................................... 3 System Requirements ................................4 Installation Procedure ................................4 CE 100 Installation in Windows XP ..........................4 CE 100 Installation in Mac OS ............................7 CE 100 Installation in Linux ............................9 Troubleshooting ..................................

  • Page 3: Product Features

    Windows 2000SP4/XP SP2/Vista/Win7 or o MAC 10.5/10.6 or o Linux Ubuntu 9.04&8.10  Plug and Play  Dimension 78mm x 28mm x 12mm (Haier CE100) 1. USB Plug 2. Indicator a. Power : Red light on b. Link : Yellow light on...

  • Page 4: System Requirements

    Connect CE100 with PC via USB. Install CE100 Dialer & Driver 1. After inserting the CE100 into computer, if PC opens the auto run function. it will pop up a installation interface. If not, please double click “My computer” >>CE100 Dialer as shown...

  • Page 5

    2. It will install the Dialer & Driver automatically. 3. After installation, back to desktop, click icon of CE100 . The main interface appears. Press connect button to start the connection.

  • Page 6

    Settings: To change network mode you can press Setting menu – network mode where you can to HSIA/CDMA 1X/HYBRID.  HSIA: Modem will work only in HSIA network if available.  CDMA 1X : Modem will work only in CDMA 1X network if available. ...

  • Page 7: Ce 100 Installation In Mac Os

    CE 100 Installation in Mac OS 1.Connect CE100 with Mac Connect CE100 with Mac via USB. 2.Install CE100 Dialer & Driver 1. Insert CE100 into computer, click icon of “CE 100 Dialer1.0” which appears in main interface as shown in the figure below...

  • Page 8

    2. After clicking the icon press continue to finish CE 100 Installation, When CE 100 installed successfully then it pop ups below dialer, where you can press connect to start the connection. Settings: To change network mode you can press Setting menu – network mode where you can to HSIA/CDMA 1X/HYBRID.

  • Page 9: Ce 100 Installation In Linux

    CE 100 Installation in Linux For CE100 data card, it can work on all kinds of Linux OS version. The following will list several popular version for the detail steps how to use on it, such as Redhat, Ubuntu, Suse, Dedian, etc.

  • Page 10

    1. In terminal write the following command: $sudo lsusb Sometimes you need to input the password for sudo, such as [sudo] password for ***: Please input it, then it should have similar information as follows: Bus 002 Device 002: ID 201e:2009 Here the 201e:2009 is very important;...

  • Page 11: Troubleshooting

    & Dialer tool in the function. Please go to “My Computer”->CD Rom first time which name is “CE100 Dialer”, open it and run the autorun.exe manually Cannot install driver Please try to uninstall (If installed previously) it and successfully then install it again.

Comments to this Manuals

Symbols: 0
Latest comments: