HOMCOM 834-809V00 Instruction Manual page 4

Function Description
On/off button
Anti-fog Function
Defog button
Time display
Maintenance
Before cleaning, ensure the mirror is turned off.
Clean using a soft and dry cloth. Never use cleaning agents or abrasive materials. Do not
allow moisture to come into contact with the lamp.
● When connected to the main power supply, the button turns blue.
● Shortly press the button to open and close the mirror.
● Long time touch to adjust brightness (dimming).
When the color reaches the desired color, retract your fingers for
finishing the setting.
● After pressing the defog button, the mirror starts to heat up and
defog. Press again to exit.
● Note: The mist eliminator will automatically stop after continuous
operation for 60 minutes to prevent prolonged damage caused
by high temperature over time.
● Press and hold the defog button for about 3 seconds, and the
number of minutes will start flashing. Release your fingers, and
briefly press the defog and on buttons to adjust the minutes to
increase/decrease.
● Hold the defog button again for about 3 seconds, and the clock
will start flashing, and briefly press the defog and on buttons to
adjust the clock to increase/decrease.
● After adjusting to the accurate time, complete the operation and
the time display will automatically stop after flashing about 3
seconds.
● The time display jumps to temperature display after about 15
seconds, and then jumps to time display again after about 5
seconds, repeating this cycle.
4