WARNING AND SAFETY INSTRUCTIONS
Before assembly, carefully read this instruction manual. Refer back to this manual
when installing the product to ensure it is fitted safely and correctly. Keep these
instructions for future use.
WARNING
Risk of fire and electric shock
● All fittings must be installed in accordance with current IEE wiring regulations. If in
doubt, consult a qualified electrician.
● Switch off the electrical supply at the main circuit board before installation and
maintenance .
● For indoor use only. This product should be positioned well away from curtains and
fabrics. Never cover the mirror.
● Regularly check the cord, the transformer and all other parts for damage. If damages
are found, do not use this product.
INSTALLATION SAFETY
● Before installation, ensure the product is not damaged or has missing parts. Handle
the product with care.
● Ensure there are no hidden pipes or cables in the wall before drilling.
● Wear suitable eye protection when drilling. Take care if drilling on tiled surfaces, just
in case the drill slips.
CAUTION
This product contains a light source of energy efficiency class <F>.
The light source of this product is non-replaceable light diodes (LED). Do not disassemble
the product, as the light diodes can damage the eyes.
NOTE: The important safeguards and instructions that appear in this manual are not meant
to cover all possible conditions and situations that may occur. It must be understood that
common sense, caution and care, are factors that can't be built into any product. These
factors must be supplied by the person(s) caring for and operating the product. Do not
install this product in hazardous locations.
CHECK PRODUCT LIST AFTER
OPENING THE PACKAGE
● LED Lighted Mirror
● Screws for wall
● Type A Plastic Anchor
● Installation Manual
● Gloves
TOOLS YOU MAY NEED
x1
x2
x2
x1
x2
2
Need help?
Do you have a question about the 834-809V00 and is the answer not in the manual?