HOMCOM 834-809V00 Instruction Manual page 3

INSTALLATION
1. Measure the distance of the hanging
hole.
3. Drill the holes and place the suitable
plastic anchors.
LIVE (usually BROWN)
WALL
GROUND (usually BLUE)
5. Connect the mirror with the main
supply.
2.Mark the hole position on the wall.
4. Arrange the screws on the wall, leaving
about 3/8 inch outside the wall, and
make sure the screws are stable.
MIRROR
6. Hang the mirror on the screw
Matters needing attention:
● Please cut off the main power supply
before wiring.
3