Clearing A Jammed Fastener - Delta ShopMaster DBN125 Instruction Manual

CLEARING A JAMMED FASTENER

Disconnect tool from air supply.
1. Open magazine and remove remaining fasteners (Fig. 28 and Fig. 29).
fastener guide plate. Fasteners are under pressure and may shoot
out of magazine which could cause injury.
2. Open the quick release latch and the fastener guide plate (Fig. 30).
3. Remove the jammed fastener (Fig. 31).
4. Close the fastener guide plate, and the quick release latch.
Remove fasteners from tool before opening the
Fig. 28
Fig. 30
11
Fig. 29
Fig. 31