Table of Contents
Advertisement
Cordless Brad Nailer
(Model CL180BN)
PART NO. 912237 - 09-10-04
Copyright © 2004 Delta Machinery
To learn more about DELTA MACHINERY
ESPAÑOL: PÁGINA 17
visit our website at: www.deltamachinery.com.
For Parts, Service, Warranty or other Assistance,
1-800-223-7278 (
1-800-463-3582).
please call
In Canada call
Advertisement
Table of Contents
Related Manuals for Delta ShopMaster CL180BN
Summary of Contents for Delta ShopMaster CL180BN
- Page 1 Cordless Brad Nailer (Model CL180BN) PART NO. 912237 - 09-10-04 Copyright © 2004 Delta Machinery To learn more about DELTA MACHINERY ESPAÑOL: PÁGINA 17 visit our website at: www.deltamachinery.com. For Parts, Service, Warranty or other Assistance, 1-800-223-7278 ( 1-800-463-3582). please call...
-
Page 2: Table Of Contents
If you have any questions relative to its application DO NOT use the product until you have written Delta Machinery and we have advised you. Online contact form at www.deltamachinery.com Postal Mail: Technical Service Manager... -
Page 3: Safety Guidelines
SAFETY GUIDELINES - DEFINITIONS It is important for you to read and understand this manual. The information it contains relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols below are used to help you recognize this information. indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. -
Page 4: General Safety Rules
GENERAL SAFETY RULES* Read all instructions Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term "power tool" in all of the warnings listed below refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. - Page 5 GENERAL SAFETY RULES* continued c) Avoid accidental starting. Ensure the switch is in the off-position before plugging in. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents. d) Remove any adjusting key or wrench before turning the power tool on.
- Page 6 GENERAL SAFETY RULES* FOR BATTERY OPERATED TOOLS 5) Battery tool use and care a) Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. b) Use battery tools only with specifically designated battery packs.
-
Page 7: Additional Specific Safety Rules
Do not use tool without safety warning label. If label is missing, damaged or unreadable, contact your Delta Service Center for a replacement. Always assume the tool contains fasteners. No horseplay. Respect the tool as a working implement. - Page 8 SYMBOL DEFINITION ......volts ......amperes ......hertz ......watts ......kilowatts ......farads µF ......microfarads ......litres ......grams ......kilograms ......bars ......pascals ......hours ......minutes ......seconds ......no-load speed …/min or …min - ..
-
Page 9: Safety Instructions For Charger And Batteries
To reduce risk of injury, a Delta charger should only be used to charge a Delta battery pack. Other types of batteries may burst causing personal injury and damage. Do not charge a Delta battery pack with any other charger. -
Page 10: Functional Description
1-800-8-BATTERY. SAVE THESE INSTRUCTIONS! FUNCTIONAL DESCRIPTION FOREWORD Delta Model CL180BN Cordless Brad Nailer is a heavy duty pneumatic brad nailer. It is designed to install 18 ga. brad nails of various lengths (from " to " long). CARTON CONTENTS SOLD ONLY IN COMBO KIT CL180WWK that includes;... - Page 11 As a battery pack approaches the discharged state, you will notice a sharp drop in tool performance. When the tool is unable to perform the task at hand, it is time to recharge the battery pack. Recharging the battery pack before this condition is reached will reduce the total work life of the pack.
-
Page 12: Assembly
NOTE: This tool is shipped completely assembled. No assembly time or tools are required. LOADING FASTENERS REMOVE BATTERY PACK. ONLY USE APPROVED DELTA FASTENERS. 1. Pull down on the nail pusher (A) Fig. 5, until it locks in the open position as shown in Fig. -
Page 13: Operation
OPERATION Complete all steps of “LOADING FASTENERS” before using the tool. Install the battery pack. To fire, grip tool firmly to maintain control, position nose of tool onto work surface, push tool firmly against work surface to depress safety, as shown at (A) Fig. 9, and then squeeze trigger (B) to fire a fastener. -
Page 14: Troubleshooting
9. Release tension on drive spring by “dry” firing nailer into scrap wood. 10. The nailer is now ready for normal operation. TROUBLESHOOTING For assistance with your tool, visit our website at www.deltamachinery.com for a list of service centers or call the Delta Machinery help line at 1-800-223- 7278. -
Page 15: Maintenance
SERVICE REPLACEMENT PARTS When servicing use only identical replacement parts. For a service parts list or to learn more about Delta Machinery visit our website at www.deltamachinery.com SERVICE AND REPAIRS All quality tools will eventually require servicing or replacement of parts due to wear from normal use. -
Page 16: Accessories
WARRANTY Two Year Limited New Product Warranty Delta will repair or replace, at its expense and at its option, any new Delta machine, machine part, or machine accessory which in normal use has proven to be defective in workmanship or material, provided that the customer returns... -
Page 17: Español
Porter-Cable • Delta products should be obtained by contacting any Porter-Cable • Delta Distributor, Authorized Service Center, or Porter-Cable • Delta Factory Service Center. If you do not have access to any of these, call 800-223-7278 and you will be directed to the nearest Porter-Cable •...