Loading Maps To Your Garmin Gps Unit; Selecting Maps - Garmin 010-10307-00 - MapSource Fishing Hot Spots User Manual

Loading Maps to Your Garmin
GPS Unit
You can load maps to your Garmin GPS in three
simple steps:
• Connect your Garmin GPS unit to your
computer.
• Select the maps you want to send to your
GPS unit.
• Transfer the maps to your GPS unit.
For help connecting your GPS unit to your computer,
see page 6 or consult the owner's manual for your
GPS unit. To select maps and send them to your GPS
unit, see the next two sections, "Selecting Maps" and
"Transferring MapSource
to view a tutorial on your MapSource installation disk
about selecting and sending maps. The tutorial is also
available online at www.garmin.com/cartography
/mapsourceTutorial.html.
NOTE: Not all Garmin GPS units can use
detailed maps. Check your GPS unit owner's
manual to see if your unit is compatible.
MapSource User's Manual
Data." You may also be able
u M s > l
sIng ap ource oadIng

Selecting Maps

Use the Map tool
want to send to your GPS unit.
NOTE: To select map regions, you must unlock
your MapSource product. For more information,
see page 1.
To select map regions:
1. Zoom to an appropriate distance on the Zoom
scale (usually 30-70 miles or 50-100 km).
2. Click the Map tool
Move the mouse over the Graphic Map. Each
map region becomes outlined in yellow when
you move over it with the mouse. The name and
size of the map region appear in the status bar.
3. Click a map region to select it. To select several
map regions at once, click and drag the mouse
over the areas you want to select. Selected map
regions are shaded pink.
M Y g gps u
aps to our arMIn
to select the map regions you
or click Tools > Map.
nIt