Related Manuals for TOLSEN TOOLS FORCE XPRESS 79584
Summary of Contents for TOLSEN TOOLS FORCE XPRESS 79584
- Page 1 79584 DRYWALL SANDER INSTRUCTION MANUAL 900W 230-240V~50Hz SAVE THIS MANUAL ! You will need this manual for safety instructions, operating procedures and warranty. Put it and the original sales receipt in a safe dry place for future reference.
-
Page 2: Important Safety Information
SAFETY IMPORTANT SAFETY INFORMATION General Power Tool Safety Warnings Note: In order to reduce the hazards of fire,electric shock and injury, etc,the statements listed below shall be taken into consideration upon application of electric tools. 1. Understand your electric tool fully by going through the user manual carefully together with identifying the application,limitation and potential risk accordingly. - Page 3 SAFETY 15. Ensure tight connections at the disk and other joints. 16. When using the device, remember to hold the handle firmly. Single-hand operations and any intentions to touch the disk are strictly prohibited. 17. Before switching on, the disk shall be away from any contact of other objects. 18.
-
Page 4: Specifications
SPECIFICATIONS AND SETUP SPECIFICATIONS Rated voltage 230-240V Frequency 50Hz Rated Power 900W No-load Speed 1400-2700/min Platen Diameter Ø180mm 1. Heat sink at the top 2. High-power Motor 3. Double LED Strip Light 4. 180mm Rotating Adhibit Tray 5. External Carbon Brush 6. -
Page 5: Switch&Speed Governor Operation
SETUP OPERATING INSTRUCTIONS Switch&Speed Governor operation This drywall sander switch is self-locking switch , it can be locked in the “ON”position. When turn on the machine ,just press the main switch button it can work. When press the switch button and the self-locking button the switch will be locked no need to press the switch button all the time. -
Page 6: Replacement Of Carbon Brush
SETUP Replacement of the round sanding pad OPERATING INSTRUCTIONS In the using if the sanding pad have been broken you can ask our company for new sanding pad. Installation Guide Taking off the sandpaper , using the wrench put into the holes in the center of the sanding pad the slackening clockwise to take off... - Page 7 SETUP Cleaning Regular cleaning shall be conducted a er grinding. Cleaning the devices frequently may help to extend operating life and reduce repair rate. It is recommended to clean the connection sets and components of electric motor without application of water. Timely cleaning is recommended a er the application of the devices.
-
Page 8: Ce Declaration Of Conformity
CE DECLARATION OF CONFORMITY SUZHOU TOLSEN TOOLS CO.,LTD. 198 HUASHAN ROAD, ZHANGJIAGANG, JIANGSU, CHINA Declare that the product 79584 Drywall sander Complies with the essential health and safety requirements of the following Directices: Machinery Directive 2006/42/EC Standards and technical specifications referred to:... - Page 9 SUZHOU TOLSEN TOOLS CO.,LTD. www.tolsentools.com TOLSEN is a trademark or registered trademark of TOLSEN TOOLS. All rights reserved. SCAN TO VISIT TolsenWorld MADE IN CHINA PRODUCT LINK...
Need help?
Do you have a question about the FORCE XPRESS 79584 and is the answer not in the manual?
Questions and answers