4
6
3
AE01174
ENGINE OIL REPLACEMENT
1. Place the machine on a level surface and warm up
the engine for several minutes.
Then stop the engine.
2. Remove the rubber cap 1 on the bottom.
1
700-130
3. Place an oil pan under the engine . Remove the
drain bolt 2.
5
2
700-132
4. Open the oil filler cover 3 as shown and remove
the oil filler cap 4 so that the oil can be complete-
ly drained.
5. Check the drain bolt , gasket 5, oil filler cap and O-
3
ring 6.
If damaged, replace.
700-133
6. Reinstall the oil drain bolt.
Drain Bolt Torque:
q
7. Add engine oil to the upper level.
1Upper level
700-006a
17 N•m (1.7 kgf•m, 12 lbf•ft)
– 23 –