Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Planet XGS-PON SFU ONT
Summary of Contents for Planet XGS-PON SFU ONT
- Page 1 XGS-PON SFU ONT with 1-Port 10GbE XGPN-100 Quick Installation Guide...
-
Page 2: Table Of Contents
Table of Contents 1. Package Contents ..................3 2. Requirements ....................4 3. Hardware Introduction ................... 5 3.1 Hardware Installation ................6 4. Starting Web Management ................8 4.1 Logging on to the XGS-PON ONU .............8 5. Recovering Back to Default Configuration ............10 6. -
Page 3: Package Contents
1. Package Contents Thank you for purchasing PLANET XGPN-100. Unless specified, “XGS-PON ONU” mentioned in this Quick Installation Guide refers to the XGPN-100. Model Description XGPN-100 XGS-PON SFU ONT with 1-Port 10GbE Open the box of the XGS-PON ONU and carefully unpack it. The box should contain... -
Page 4: Requirements
To connect the XGPN-100 to an XG-PON network, the following equip- ment is required: - XG-PON OLT Switch: PLANET XGPL-16000 (16-Port XG(S)-PON OLT) - XG-PON OLT Transceiver: PLANET XGPL-XGSFP-N1... -
Page 5: Hardware Introduction
3. Hardware Introduction Front View Rear View... -
Page 6: Hardware Installation
3.1 Hardware Installation Step 1: Connect the Power Adapter provided in the package to the XGPN-100. The Power LED on the front panel will turn on accordingly. Power Step 2: Follow the diagram below to connect the network devices: - Power Connection: Plug in the power adapter and turn on the device. - LAN Connection: Use an Ethernet cable to connect a computer or switch to the LAN port. - Page 7 Passive Optical Network Splitter...
-
Page 8: Starting Web Management
4. Starting Web Management The following instructions explain how to access the Web Management interface of the XGS-PON ONU. Configuration is performed via an Ethernet connection, so ensure that the management PC is set to the same IP subnet. For example, if the default IP address of the XGS-PON ONU is 192.168.1.1, the management PC should be assigned an IP address within the 192.168.1.x range (where x is any number between 2 and 254). - Page 9 Figure 4-2: Web Main Screen of XGPN-100...
-
Page 10: Recovering Back To Default Configuration
5. Recovering Back to Default Configuration IP address has been changed or admin password has been forgotten – To restore factory settings: 1. Press and hold the reset button on the front panel for “15 seconds” until the LED indicators blink. 2. Wait for the device to reboot. 3. After resetting, the device will revert to the following settings: Default IP Address: 192.168.1.1 Default User Account: user/password: 123456 Default Admin Account: admin/password: super&123 Reset Button Figure 5-1: XGPN-100 Reset Button... -
Page 11: Customer Support
6. Customer Support Thank you for purchasing PLANET products. You can browse our online FAQ resource and User’s Manual on PLANET Web site first to check if it could solve your issue. If you need more support information, please contact PLANET support team. PLANET online FAQs: http://www.planet.com.tw/en/support/faq Support team mail address: support@planet.com.tw...
Need help?
Do you have a question about the XGS-PON SFU ONT and is the answer not in the manual?
Questions and answers