Thermador FREEDOM T18ID80NRP Design Manual page 31

Design guide - freedom refrigeration
Hide thumbs Also See for FREEDOM T18ID80NRP:
Table of Contents

Advertisement

FREEDOM® COLLECTION
Model: Framed Column T30BR70FSE
T30BR70FSE
30-Inch Framed, Right-Hand Door Swing
Pre-assembled with Chiseled Stainless
Steel Panels and Professional Handle
SPECIFICATIONS
Total Capacity (cu. ft.)
Product Width
Product Height
Product Depth*
Cutout Width
Cutout Height
Cutout Depth
Door Swing Clearance
Door Swing
Annual Energy Consumption
Electrical Supply
Power Cord Included
Shipping Weight (lbs.)
*Depth without door panel
ACCESSORIES
See pages 232-233 for Freedom Collection accessories.
240
30-INCH FRESH FOOD COLUMN
17
29
3
/
"
4
84"
24"
30"
84"
24" Minimum
32
21
/
"
32
Reversible
319 kWh
120V/15 Amp Circuit
120V-3 prong
421
INSTALLATION OPTIONS
The Freedom® Collection offers you a variety of installation
possibilities. In some instances, special accessories are required!
INDIvIDUAL COLUMN INSTALLATIONS
SIDE-By-SIDE INSTALLATIONS
When two framed appliances are installed side-by-side,
use TE42UKIT10 or TE48UKIT10 to ensure a stable
connection. These kits are for 42-inch or 48-inch side-by-
side combinations and include the side-by-side sealing kit
(BSEALKIT10) and a 42-inch or 48-inch top frame part to
maintain the framed design.
INDIvIDUAL APPLIANCES wITH PARTITION
When dimensioning the partition for model 4, note the thickness
of the furniture fronts to prevent damage if the doors are opened
at the same time.
Use the Extreme Combination Side-by-Side Heating Kit
(XHEATKIT10) if the gap between the appliance is less than
6" (160 mm) or for permanent connection of two individual
appliances, (e.g. freezer or bottom mount appliance next to
a freezer).
Minimum thickness of the partition
1
2
3
4
AT THE END OF A kITCHEN
If one side of the appliance is visible, a side panel must be used.
The side panel must be connected rmly to the wall, the floor
and the overhead furniture/ xtures before the appliance is placed
in the cavity.
The dimensions of the side panel are taken from the opposite
cavity wall. During installation ensure that the cavity is square and
the exact size.
5
/
" (16 mm).
8

Advertisement

Table of Contents
loading

Table of Contents