Thermador FREEDOM T18ID80NRP Design Manual page 29

FREEDOM® COLLECTION
Model: Flush Column T30IR70NSP
T30IR70NSP
30-Inch Flush, Reversible Door Swing
Build Your Custom Column
See pages 230-231 for details.
SPECIFICATIONS
Total Capacity (cu. ft.)
Product Width
Product Height
Product Depth*
Cutout Width
Cutout Height
Cutout Depth**
Door Swing Clearance
Door Swing
Annual Energy Consumption
Electrical Supply
Power Cord Included
Shipping Weight (lbs.)
*Depth without door panel
**Cutout depth for flush installation with
ACCESSORIES
See pages 232-233 for Freedom Collection accessories.
238
30-INCH FRESH FOOD COLUMN
17
29 3 / "
4
84"
24"
30"
84"
24 3 / "
4
32 31 / "
32
Reversible
319 kWh
120V/15 Amp Circuit
120V-3 prong
421
/ " thick panel
3
4
INSTALLATION OPTIONS
The Freedom® Collection offers you a variety of installation
possibilities. In some instances, special accessories are required!
INDIvIDUAL COLUMN INSTALLATIONS
SIDE-BY-SIDE INSTALLATIONS
When two appliances are installed side-by-side, the Side-by-
Side Sealing Kit (BSEALKIT10) must be used to ensure a stable
connection.
When combining two appliances with a freezing function
(e.g. two freezers or one bottom mount appliance and one
freezer), use the Extreme Combination Side-by-Side Heating Kit
(XHEATKIT10).
INDIvIDUAL APPLIANCES wITH PARTITION
When dimensioning the partition for model 4, note the thickness
of the furniture fronts to prevent damage if the doors are opened
at the same time.
Use the Extreme Combination Side-by-Side Heating Kit
(XHEATKIT10) if the gap between the appliance is less than
6" (160 mm) or for permanent connection of two individual
appliances, (e.g. freezer or bottom mount appliance next to
a freezer).
Minimum thickness of the partition
1 2
3 4
AT THE END OF A KITCHEN
If one side of the appliance is visible, a side panel must be used.
The side panel must be connected rmly to the wall, the floor
and the overhead furniture/ xtures before the appliance is placed
in the cavity.
The dimensions of the side panel are taken from the opposite
cavity wall. During installation ensure that the cavity is square and
the exact size.
5 / " (16 mm).
8