Fortin EVO ALL Installation Instructions Manual
Hide thumbs Also See for EVO ALL:

Advertisement

ALL
REGULAR & THAR-FOR2 INSTALLATION
VEHICLE
FORD
Explorer
F-150
F-250 / F-350 / F-450 /
without Keyless
F-550
Fusion
MODEL: EVO-ALL
DATE:02/2019
2019
SN: 000000 00000
MADE IN CANADA
© 2018 ALL RIGHTS RESERVED
MANDATORY INSTALL
HOOD STATUS : THE HOOD PIN SWITCH MUST BE INSTALLED
* HOOD PIN
IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN,
SET FUNCTION A11 TO OFF.
1 / 10
Page
YEARS
2016-2018
2015-2020
2020
2013-2019
2013-2019
Hybrid
QR CODE
COMPATIBLE
ON THE LABEL
MODULE
MANUFACTURED
REQUIRED:
2019
AFTER:
Program bypass option:
IF THE VEHICLE IS NOT EQUIPPED
WITH FUNCTIONAL HOOD PIN:
Program bypass option
(Vehicle diesel
Program bypass option
(Vehicle hybrid
REV.: 20200910
Vehicle functions supported in this diagram (functional if equipped)
FIRMWARE VERSION
To add the firmware version and the options, use the
FLASH LINK UPDATER or FLASH LINK MOBILE tool,
71.[52]
FORD MINIMUM
UNIT OPTION
C1
A11
OFF
:
UNIT OPTION
only):
D1.3
UNIT OPTION
only):
D4
Notice: the installation of safety
elements are mandatory. The hood pin
is an essential security element and
OFF
A11
must be installed.
Guide # 97271
ADDENDUM - SUGGESTED WIRING
sold separately.
DESCRIPTION
OEM Remote status (Lock/Unlock)
monitoring
Hood trigger (Output Status).
DESCRIPTION
Diesel mode (Vehicle diesel only)
DESCRIPTION
Hybrid mode (Vehicle hybrid only)
THIS MODULE MUST BE INSTALLED BY A
QUALIFIED TECHNICIAN. A WRONG
CONNECTION CAN CAUSE PERMANENT
DAMAGE TO THE VEHICLE.
CONFIGURATION

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EVO ALL and is the answer not in the manual?

Questions and answers

Summary of Contents for Fortin EVO ALL

  • Page 1 1 / 10 REV.: 20200910 Guide # 97271 Page REGULAR & THAR-FOR2 INSTALLATION ADDENDUM - SUGGESTED WIRING CONFIGURATION Vehicle functions supported in this diagram (functional if equipped) VEHICLE YEARS FORD Explorer 2016-2018 • • • • • • • • •...
  • Page 2 2 / 10 Page DESCRIPTION Parts required (Not included) PAGE WIRE TO WIRE DIAGRAM Vehicle key for programming Diode 1Amp Page 3 Relay (key Bypass) Relay (Parking lights) THARNESS DIAGRAM THARNESS THAR-FOR2 THAR-FOR2 Vehicle key for programming Page 4 Relay (Parking lights) Behind OBD-II connector Trunk release switch on the dash left side of steering column.
  • Page 3: Wiring Connection

    3 / 10 Page WIRING CONNECTION IN RS8 RS7 OUT REMOTE IN RS9 RAKE TARTER STARTER RS6a OUT RUNK ELEASE OUT RS11 GNITION (+/-) RS6 IN/OUT ACHOMETER IN RS12 GNITION RS5 OUT IN RS13 CCESSORY ROUND HILE UNNING OUT RS14 RS3 OUT RUNK IN RS15...
  • Page 4 4 / 10 Page THAR-FOR2 WIRING CONNECTION | IN RS8 RS7 OUT REMOTE RAKE IN RS9 TARTER STARTER RUNK ELEASE OUT RS11 (+/-) RS6 IN/OUT ACHOMETER IN RS12 GNITION IN RS13 ROUND HILE UNNING OUT RS14 NOTE PAGE 1 RS3 OUT RUNK IN RS15 ARKING...
  • Page 5 5 / 10 Page DCRYPTOR PROGRAMMING PROCEDURE Parts required (not included) FLASH LINK UPDATER FLASH LINK MOBILE FLASH LINK MANAGER FLASH LINK MOBILE APP SOFTWARE Smartphone Android or iOS with Internet connection Microsoft Windows Computer with Internet connection (Internet provider charges may apply) BEFORE PROGRAMMING SET THE UNIT OPTION AND SAVE.
  • Page 6 6 / 10 Page KEY BYPASS PROGRAMMING PROCEDURE 2/4 Press release PRESS X1 KEY#1 programming button once. CLÉ#1 PRESS  The BLUE LED will turn OFF. IGNITION The vehicle’s ignition will turn ON. WAIT  The RED LED will stay ON. IGNITION The vehicle’s ignition will WAIT...
  • Page 7 7 / 10 Page KEY BYPASS PROGRAMMING PROCEDURE 3/4 Wait, The vehicle’s ignition will IGNITION FLASH RAPIDLY turn ON.  The BLUE LED will flash rapidly. The vehicle’s ignition will ALTERNATE turn OFF.  The RED and YELLOW LED’s will alternated. Disconnect all the connectors and after the Data-Link (4-pins) connector.
  • Page 8 8 / 10 Page KEY BYPASS PROGRAMMING PROCEDURE 4/4 IGNITION ON IGNITION OFF Turn the key to the OFF position.  The YELLOW will turn OFF. REMOTE STARTER / ALARM VERIFICATION PROCEDURE The module is now programmed. Test the remote starter. Remote start the vehicle.
  • Page 9 9 / 10 Page REMOTE STARTER FUNCTIONALITY Start TURN UNLOCK ON/RUN Remote start the Unlock the doors with Insert and Turn All doors must Press The vehicle can be closed. vehicle. the remote-starter the key to the the brake pedal. now be put in to remote or the OEM Ignition ON/RUN...
  • Page 10 1 / 10 REV.: 20210608 Guide # 97321 Page REGULAR & THAR-FOR2 INSTALLATION ADDENDUM - SUGGESTED WIRING CONFIGURATION Vehicle functions supported in this diagram (functional if equipped) VEHICLE YEARS FORD Transit 2020-2021 • • • • • • • • •...
  • Page 11 2 / 10 Page DESCRIPTION Parts required (Not included) PAGE WIRE TO WIRE DIAGRAM Vehicle key for programming 1Amp. Diode Page 3 Relay THARNESS DIAGRAM THARNESS THAR-FOR2 THAR-FOR2 Vehicle key for programming Page 4 Relay Behind OBD-II connector left side of steering column. CAN1 LOW CAN1 HIGH (+)12V...
  • Page 12 3 / 10 Page WIRING CONNECTION IN RS8 RS7 OUT REMOTE RAKE IN RS9 TARTER STARTER RS6a OUT GNITION (+/-) RS6 IN/OUT ACHOMETER IN RS12 GNITION RS5 OUT IN RS13 CCESSORY ROUND HILE UNNING OUT RS14 RUNK IN RS15 12V B RS2 IN IN RS16 ATTERY...
  • Page 13 4 / 10 Page THAR-FOR2 WIRING CONNECTION IN RS8 RS7 OUT REMOTE RAKE IN RS9 TARTER STARTER (+/-) RS6 IN/OUT ACHOMETER IN RS12 GNITION IN RS13 SEE | VOIR ROUND HILE UNNING OUT RS14 NOTE PAGE 1 RUNK IN RS15 Fuse 12V B RS2 IN...
  • Page 14 5 / 10 Page DCRYPTOR PROGRAMMING PROCEDURE Parts required (not included) FLASH LINK UPDATER FLASH LINK MOBILE FLASH LINK MANAGER FLASH LINK MOBILE APP SOFTWARE | PROGRAMME Smartphone Android or iOS with Internet connection Microsoft Windows Computer with Internet connection (Internet provider charges may apply) BEFORE PROGRAMMING SET THE UNIT OPTIONS AND SAVE.
  • Page 15 6 / 10 Page KEY BYPASS PROGRAMMING PROCEDURE 2/4 Press release PRESS X1 KEY#1 programming button once. PRESS  The BLUE LED will turn OFF. IGNITION The vehicle’s ignition will turn ON. WAIT  The RED LED will stay ON. IGNITION The vehicle’s ignition will WAIT...
  • Page 16 7 / 10 Page KEY BYPASS PROGRAMMING PROCEDURE 3/4 Wait, The vehicle’s ignition will IGNITION FLASH RAPIDLY turn ON.  The BLUE LED will flash rapidly. The vehicle’s ignition will ALTERNATE turn OFF.  The RED and YELLOW LED’s will alternated. Disconnect all the connectors and after the Data-Link (4-pins) connector.
  • Page 17 8 / 10 Page KEY BYPASS PROGRAMMING PROCEDURE 4/4 IGNITION ON IGNITION OFF Turn the key to the OFF position.  The YELLOW will turn OFF. REMOTE STARTER / ALARM VERIFICATION PROCEDURE The module is now programmed. Test the remote starter. Remote start the vehicle.
  • Page 18 9 / 10 Page REMOTE STARTER FUNCTIONALITY Start TURN UNLOCK ON/RUN Remote start the Unlock the doors with Insert and Turn All doors must Press The vehicle can be closed. vehicle. the remote-starter the key to the the brake pedal. now be put in to remote or the OEM Ignition ON/RUN...
  • Page 19 1 / 12 REV.: 20200910 Guide # 97281 Page STANDALONE & THAR-FOR2 INSTALLATION ADDENDUM - SUGGESTED WIRING CONFIGURATION ONLY COMPATIBLE WITH AUTOMATIC TRANSMISSION VEHICLES. Vehicle functions supported in this diagram (functional if equipped) VEHICLE YEARS FORD Explorer 2016-2019 • • •...
  • Page 20: Stand Alone Configuration

    2 / 12 Page PARTS REQUIRED (NOT INCLUDED) MANDATORY FLASH LINK UPDATER Notice: the installation of safety FLASH LINK MANAGER elements are mandatory. REMOTE START SAFETY OVERRIDE HOOD PIN SWITCH The hood pin and the valet switch are SOFTWARE | PROGRAMME essential security elements and must Microsoft Windows Computer with Internet connection...
  • Page 21 3 / 12 Page DESCRIPTION Parts required (Not included) PAGE WIRE TO WIRE DIAGRAM Vehicle key for programming Diode 1Amp Page 3 Relay (key Bypass) Relay (Parking lights) THARNESS DIAGRAM THARNESS THAR-FOR2 THAR-FOR2 Vehicle key for programming Page 4 Relay (Parking lights) Behind OBD-II connector left side of steering column.
  • Page 22 4 / 12 Page AUTOMATIC TRANSMISSION WIRING CONNECTION (+)Ignition Hood pin only required on vehicles not Connection required for some remote starter. OPTIONAL RF-KIT REMOTE equipped with a factory hood pin. STARTER RS2 IN 12V Battery 12V Battery WITH RF KIT: RS2 IN Ground | Masse WITH DATA-LINK:...
  • Page 23 5 / 12 Page THAR-FOR2 AUTOMATIC TRANSMISSION CONNECTION Hood pin only required on vehicles not OPTIONAL RF-KIT REMOTE equipped with a factory hood pin. STARTER WITH | AVEC DATA-LINK: WITH | AVEC DATA-LINK: Direct connection WITH | AVEC D2D: Valet switch NOT CONNECTED Start / Stop external control WITHOUT DATA-LINK:...
  • Page 24 6 / 12 Page DCRYPTOR PROGRAMMING PROCEDURE Parts required (not included) FLASH LINK UPDATER FLASH LINK MOBILE FLASH LINK MANAGER FLASH LINK MOBILE APP SOFTWARE | PROGRAMME Smartphone Android or iOS with Internet connection Microsoft Windows Computer with Internet connection (Internet provider charges may apply) BEFORE PROGRAMMING SET THE UNIT OPTION AND SAVE.
  • Page 25 7 / 12 Page KEY BYPASS PROGRAMMING PROCEDURE 2/4 Press release PRESS X1 KEY#1 programming button once. CLÉ#1 PRESS  The BLUE LED will turn OFF. IGNITION The vehicle’s ignition will turn ON. WAIT  The RED LED will stay ON. IGNITION The vehicle’s ignition will WAIT...
  • Page 26 8 / 12 Page KEY BYPASS PROGRAMMING PROCEDURE 3/4 Wait, The vehicle’s ignition will IGNITION FLASH RAPIDLY turn ON.  The BLUE LED will flash rapidly. The vehicle’s ignition will ALTERNATE turn OFF.  The RED and YELLOW LED’s will alternated. Disconnect all the connectors and after the Data-Link (4-pins) connector.
  • Page 27 9 / 12 Page KEY BYPASS PROGRAMMING PROCEDURE 4/4 IGNITION ON IGNITION OFF Turn the key to the OFF position.  The YELLOW will turn OFF. REMOTE STARTER / ALARM VERIFICATION PROCEDURE The module is now programmed. Test the remote starter. Remote start the vehicle.
  • Page 28 10 / 12 Page OPTIONAL RF-KIT PROGRAMMING PROGRAM BYPASS OPTION Supported RF-KITS enable Fortin 2 Program bypass option: OPTIONAL FORTIN RF KIT SERIES 4 OR SERIES 9 PROGRAMMING ON EACH 4X BRAKES TURN TURN TURN TURN TRANSMITTER ON/RUN ON/RUN SUR CHACUNE DES TÉLÉCOMMANDES...
  • Page 29 11 / 12 Page REMOTE STARTER FUNCTIONALITY Start TURN UNLOCK ON/RUN Remote start the Unlock the doors with Insert and Turn All doors must Press The vehicle can be closed. vehicle. the remote-starter the key to the the brake pedal. now be put in to remote or the OEM Ignition ON/RUN...
  • Page 30 1 / 12 REV.: 20210608 Guide # 97331 Page STANDALONE & THAR-FOR2 INSTALLATION ADDENDUM - SUGGESTED WIRING CONFIGURATION ONLY COMPATIBLE WITH AUTOMATIC TRANSMISSION VEHICLES. Vehicle functions supported in this diagram (functional if equipped) VEHICLE YEARS FORD Transit 2020-2021 • • •...
  • Page 31 2 / 12 Page PARTS REQUIRED (NOT INCLUDED) MANDATORY | OBLIGATOIRE FLASH LINK UPDATER Notice: the installation of safety FLASH LINK MANAGER elements are mandatory. REMOTE START SAFETY OVERRIDE HOOD PIN SWITCH The hood pin and the valet switch are SOFTWARE | PROGRAMME essential security elements and must Microsoft Windows Computer...
  • Page 32 3 / 12 Page DESCRIPTION Parts required (Not included) PAGE WIRE TO WIRE DIAGRAM Vehicle key for programming Diode 1Amp Page 3 Relay THARNESS DIAGRAM THARNESS THAR-FOR2 THAR-FOR2 Page 4 Vehicle key for programming Behind OBD-II connector left side of steering column. CAN1 LOW CAN1 HIGH (+)12V...
  • Page 33 4 / 12 Page AUTOMATIC TRANSMISSION WIRING CONNECTION (+)Ignition Hood pin only required on vehicles not Connection required for some remote starter. OPTIONAL RF-KIT REMOTE equipped with a factory hood pin. STARTER RS2 IN 12V Battery WITH RF KIT: RS2 IN 12V Battery WITH DATA-LINK: Ground | Masse...
  • Page 34 5 / 12 Page THAR-FOR2 AUTOMATIC TRANSMISSION CONNECTION Hood pin only required on vehicles not OPTIONAL RF-KIT REMOTE equipped with a factory hood pin. STARTER WITH | AVEC DATA-LINK: WITH | AVEC DATA-LINK: Direct connection WITH | AVEC D2D: Valet switch commutateur valet NOT CONNECTED Start / Stop external control...
  • Page 35 6 / 12 Page DCRYPTOR PROGRAMMING PROCEDURE Parts required (not included) FLASH LINK UPDATER FLASH LINK MOBILE FLASH LINK MANAGER FLASH LINK MOBILE APP SOFTWARE | PROGRAMME Smartphone Android or iOS with Internet connection Microsoft Windows Computer with Internet connection (Internet provider charges may apply) BEFORE PROGRAMMING SET THE UNIT OPTIONS AND SAVE.
  • Page 36 7 / 12 Page KEY BYPASS PROGRAMMING PROCEDURE 2/4 Press release PRESS X1 KEY#1 programming button once. PRESS  The BLUE LED will turn OFF. IGNITION The vehicle’s ignition will turn ON. WAIT  The RED LED will stay ON. IGNITION The vehicle’s ignition will WAIT...
  • Page 37 8 / 12 Page KEY BYPASS PROGRAMMING PROCEDURE 3/4 Wait, The vehicle’s ignition will IGNITION FLASH RAPIDLY turn ON.  The BLUE LED will flash rapidly. The vehicle’s ignition will ALTERNATE turn OFF.  The RED and YELLOW LED’s will alternated. Disconnect all the connectors and after the Data-Link (4-pins) connector.
  • Page 38 9 / 12 Page KEY BYPASS PROGRAMMING PROCEDURE 4/4 IGNITION ON IGNITION OFF Turn the key to the OFF position.  The YELLOW will turn OFF. REMOTE STARTER / ALARM VERIFICATION PROCEDURE The module is now programmed. Test the remote starter. Remote start the vehicle.
  • Page 39 10 / 12 Page OPTIONAL RF-KIT PROGRAMMING PROGRAM BYPASS OPTION ☑ Supported RF-KITS enable ☑ Fortin 2 Program bypass option: OPTIONAL FORTIN RF KIT SERIES 4 OR SERIES 9 PROGRAMMING ON EACH 4X BRAKES TURN TURN TURN TURN TRANSMITTER ON/RUN...
  • Page 40 11 / 12 Page REMOTE STARTER FUNCTIONALITY Start TURN UNLOCK ON/RUN Remote start the Unlock the doors with Insert and Turn All doors must Press The vehicle can be closed. vehicle. the remote-starter the key to the the brake pedal. now be put in to remote or the OEM Ignition ON/RUN...
  • Page 41 1 / 7 REV.: 20200417 Guide # 59411 Page THAR-FOR2 THARNESS ADDENDUM - SUGGESTED WIRING CONFIGURATION INSTALLATION Vehicle functions supported in this diagram (functional if equipped) VEHICLE YEARS FORD Explorer 2016-2019 • • • • • • • • • •...
  • Page 42 2 / 7 Page DESCRIPTION Trunk release switch on the dash Parking Ligts switch (  )PARKING LIGHTS (-)TRUNK RELEASE ( - )PARKING LIGHTS Ignition barrel Behind OBD-II connector left side of steering column. CAN2 LOW CAN2 HIGH At ignition barrel GROUND CAN1 LOW CAN1 HIGH...
  • Page 43: Wiring Connection

    3 / 7 Page WIRING CONNECTION IN RS8 RS7 OUT REMOTE RAKE IN RS9 TARTER STARTER RS6a OUT RUNK ELEASE OUT RS11 GNITION (+/-) RS6 IN/OUT ACHOMETER IN RS12 GNITION RS5 OUT IN RS13 CCESSORY RS4 OUT SEE | VOIR ROUND HILE UNNING...
  • Page 44 4 / 7 Page KEY BYPASS PROGRAMMING PROCEDURE 1/3 Press and hold programming button: Insert the 4-Pin (Data-Link) HOLD connector.  The Blue, Red, Yellow and Blue & Red LED’s will LED may differ depending on the module casing. alternatively illuminate. Release the programming button when the LED’s are RED and BLUE.
  • Page 45 5 / 7 Page KEY BYPASS PROGRAMMING PROCEDURE 2/3 Turn the ignition to the OFF la clé à la position position. TURN REMOVE remove the first key.  The RED LED will turn ON solid. Turn the second functIonal WAIT TURN key to the ON/RUN position.
  • Page 46 6 / 7 Page KEY BYPASS PROGRAMMING PROCEDURE 3/3 Disconnect all the connectors and after the Data-Link (4-pins) connector. Microsoft Windows Computer with Internet connection* Use the tool: FLASH LINK UPDATER* FLASH LINK MANAGER* FLASH LINK UPDATER or FLASH LINK MOBILE SOFTWARE | PROGRAMME to visit the DCryptor menu.
  • Page 47 Guide # 59421 1 / 8 REV.: 20200417 Page THAR-FOR2 THARNESS STAND ALONE INSTALLATION ADDENDUM - SUGGESTED WIRING CONFIGURATION ONLY COMPATIBLE WITH AUTOMATIC TRANSMISSION VEHICLES. Vehicle functions supported in this diagram (functional if equipped) VEHICLE YEARS FORD Explorer 2016-2019 • •...
  • Page 48 2 / 8 Page PARTS REQUIRED (NOT INCLUDED) MANDATORY | OBLIGATOIRE FLASH LINK UPDATER Notice: the installation of safety FLASH LINK MANAGER elements are mandatory. REMOTE START SAFETY OVERRIDE HOOD PIN SWITCH The hood pin and the valet switch are SOFTWARE | PROGRAMME essential security elements and must Microsoft Windows Computer...
  • Page 49 3 / 8 Page DESCRIPTION Parking Ligts switch (  )PARKING LIGHTS ( - )PARKING LIGHTS Ignition barrel Behind OBD-II connector left side of steering column. CAN2 LOW CAN2 HIGH At ignition barrel GROUND CAN1 LOW CAN1 HIGH At ignition barrel...
  • Page 50 4 / 8 Page AUTOMATIC TRANSMISSION WIRING CONNECTION Hood pin only required on vehicles not OPTIONAL RF-KIT REMOTE equipped with a factory hood pin. STARTER WITH | AVEC DATA-LINK: WITH | AVEC DATA-LINK: Direct connection WITH | AVEC D2D: Valet switch commutateur valet NOT CONNECTED Start / Stop external control...
  • Page 51 5 / 8 Page KEY BYPASS PROGRAMMING PROCEDURE 1/3 Press and hold programming button: Insert the 4-Pin (Data-Link) HOLD connector.  The Blue, Red, Yellow and Blue & Red LED’s will LED may differ depending on the module casing. alternatively illuminate. Release the programming button when the LED’s are RED and BLUE.
  • Page 52 6 / 8 Page KEY BYPASS PROGRAMMING PROCEDURE 2/3 Turn the ignition to the OFF position. TURN REMOVE remove the first key.  The RED LED will turn ON solid. Turn the second functIonal WAIT TURN key to the ON/RUN position. 3 SEC ON/RUN KEY#2...
  • Page 53 7 / 8 Page KEY BYPASS PROGRAMMING PROCEDURE 3/3 Disconnect all the connectors and after the Data-Link (4-pins) connector. Microsoft Windows Computer with Internet connection* Use the tool: FLASH LINK UPDATER* FLASH LINK MANAGER* FLASH LINK UPDATER or FLASH LINK MOBILE SOFTWARE | PROGRAMME to visit the DCryptor menu.
  • Page 54 1 / 10 REV.: 20210409 REV.: 20210409 Guide # 97291 Page REGULAR & THAR-FOR2 INSTALLATION ADDENDUM - SUGGESTED WIRING CONFIGURATION Vehicle functions supported in this diagram (functional if equipped) VEHICLE YEARS FORD Explorer 2016-2018 • • • • • • •...
  • Page 55 2 / 10 Page DESCRIPTION | DESCRIPTION Parts required (Not included) PAGE WIRE TO WIRE DIAGRAM Vehicle key for programming Diode 1Amp Page 3 Relay (key Bypass) Relay (Parking lights) THARNESS DIAGRAM THAR-FOR2 THARNESS THAR-FOR2 Vehicle key for programming Page 4 Relay (Parking lights) Behind OBD-II connector Trunk release switch on the dash...
  • Page 56: Wiring Connection

    3 / 10 Page WIRING CONNECTION Yellow HOOD PIN (+) KEY SENSE Purple Purple/White Green White Orange Orange/Black (-)Horn Dk.Blue Red/Blue CUT LOOP FOR AUTOMATIC Lt.Blue/Black In/Out TRANSMISSION MODE. IMMO DATA Black Pink RELAY - PARKING LIGHTS (-)Trunk Release Yellow/Black Brown/White (-)Hood Pink/Black...
  • Page 57 4 / 10 Page THAR-FOR2 WIRING CONNECTION T-HARNESS Yellow NOT CONNECTED Purple Purple/White Green CUT LOOP FOR AUTOMATIC White TRANSMISSION MODE. Orange Orange/Black (-)Horn Dk.Blue Red/Blue Lt.Blue/Black T-HARNESS In/Out Black (-)Parking Lights Pink Yellow/Black (-)Trunk Release Brown/White Pink/Black (-) Hood pin HOOD PIN Brown Purple/Yellow...
  • Page 58 5 / 10 Page DCRYPTOR PROGRAMMING PROCEDURE Parts required (not included) FLASH LINK UPDATER FLASH LINK MOBILE FLASH LINK MANAGER FLASH LINK MOBILE APP SOFTWARE Smartphone Android or iOS with Internet connection Microsoft Windows Computer with Internet connection (Internet provider charges may apply) BEFORE PROGRAMMING SET THE UNIT OPTIONS AND SAVE.
  • Page 59 6 / 10 Page KEY BYPASS PROGRAMMING PROCEDURE 2/4 Press release PRESS X1 KEY#1 programming button once. PRESS  The BLUE LED will turn OFF. IGNITION The vehicle’s ignition will turn ON. WAIT  The RED LED will stay ON. IGNITION The vehicle’s ignition will WAIT...
  • Page 60 7 / 10 Page KEY BYPASS PROGRAMMING PROCEDURE 3/4 Wait, The vehicle’s ignition will IGNITION FLASH RAPIDLY turn ON.  The BLUE LED will flash rapidly. The vehicle’s ignition will IGNITION OFF FLASH RAPIDLY turn OFF.  The RED and YELLOW LED’s will alternated.
  • Page 61 8 / 10 Page KEY BYPASS PROGRAMMING PROCEDURE 4/4 IGNITION ON IGNITION OFF Turn the key to the OFF position.  The YELLOW will turn OFF. REMOTE STARTER / ALARM VERIFICATION REMOTE STARTER / ALARM VERIFICATION PROCEDURE The module is now programmed. Test the remote starter.
  • Page 62 9 / 10 Page REMOTE STARTER PROGRAMMING PROCEDURE REFER TO THE QUICK INSTALL GUIDE INCLUDED WITH THE MODULE FOR THE REMOTE STARTER PROGRAMMING. REMOTE STARTER FUNCTIONALITY Start TURN UNLOCK ON/RUN Remote start the All doors must Unlock the doors with Insert and Turn Press The vehicle can...
  • Page 63 1 / 10 REV.: 20210608 Guide # 97341 Page REGULAR & THAR-FOR2 INSTALLATION ADDENDUM - SUGGESTED WIRING CONFIGURATION Vehicle functions supported in this diagram (functional if equipped) VEHICLE YEARS FORD 2020-2021 • • • • • • • • • •...
  • Page 64 2 / 10 Page DESCRIPTION Parts required (Not included) PAGE WIRE TO WIRE DIAGRAM Vehicle key for programming Diode 1Amp Page 3 Relay THARNESS DIAGRAM THAR-FOR2 THARNESS THAR-FOR2 Page 4 Vehicle key for programming Behind OBD-II connector left side of steering column. CAN1 LOW CAN1 HIGH (+)12V...
  • Page 65 3 / 10 Page WIRING CONNECTION Yellow HOOD PIN (+) KEY SENSE Purple Purple/White Green White Orange Orange/Black Dk.Blue Red/Blue CUT LOOP FOR AUTOMATIC TRANSMISSION MODE. Lt.Blue/Black In/Out IMMO DATA Black Pink Yellow/Black Brown/White Pink/Black (-)Hood Brown Purple/Yellow (+) KEY SENSE In/Out Gray/Black CAN 1 LOW...
  • Page 66 4 / 10 Page THAR-FOR2 WIRING CONNECTION T-HARNESS Yellow NOT CONNECTED Purple Purple/White Green CUT LOOP FOR AUTOMATIC White TRANSMISSION MODE. Orange Orange/Black Dk.Blue Red/Blue Lt.Blue/Black T-HARNESS In/Out Black Pink Yellow/Black Brown/White Pink/Black (-) Hood pin HOOD PIN Brown Purple/Yellow (+) KEY SENSE In/Out Gray/Black...
  • Page 67 5 / 10 Page DCRYPTOR PROGRAMMING PROCEDURE Parts required (not included) FLASH LINK UPDATER FLASH LINK MOBILE FLASH LINK MANAGER FLASH LINK MOBILE APP SOFTWARE | PROGRAMME Smartphone Android or iOS with Internet connection Microsoft Windows Computer with Internet connection (Internet provider charges may apply) BEFORE PROGRAMMING SET THE UNIT OPTIONS AND SAVE.
  • Page 68 6 / 10 Page KEY BYPASS PROGRAMMING PROCEDURE 2/4 Press release PRESS X1 KEY#1 programming button once. PRESS  The BLUE LED will turn OFF. IGNITION The vehicle’s ignition will turn ON. WAIT  The RED LED will stay ON. IGNITION The vehicle’s ignition will WAIT...
  • Page 69 7 / 10 Page KEY BYPASS PROGRAMMING PROCEDURE 3/4 Wait, The vehicle’s ignition will IGNITION FLASH RAPIDLY turn ON.  The BLUE LED will flash rapidly. The vehicle’s ignition will IGNITION OFF FLASH RAPIDLY turn OFF.  The RED and YELLOW LED’s will alternated.
  • Page 70 8 / 10 Page KEY BYPASS PROGRAMMING PROCEDURE 4/4 IGNITION ON IGNITION OFF Turn the key to the OFF position.  The YELLOW will turn OFF. REMOTE STARTER / ALARM VERIFICATION REMOTE STARTER / ALARM VERIFICATION PROCEDURE The module is now programmed. Test the remote starter.
  • Page 71 9 / 10 Page REMOTE STARTER PROGRAMMING PROCEDURE REFER TO THE QUICK INSTALL GUIDE INCLUDED WITH THE MODULE FOR THE REMOTE STARTER PROGRAMMING. REMOTE STARTER FUNCTIONALITY Start TURN UNLOCK ON/RUN Remote start the All doors must Unlock the doors with Insert and Turn Press The vehicle can...
  • Page 72 1 / 7 REV.: 20200417 REV.: 20200417 Guide # 59431 Page THAR-FOR2 THARNESS ADDENDUM - SUGGESTED WIRING INSTALLATION CONFIGURATION Vehicle functions supported in this diagram (functional if equipped) | VEHICLE YEARS FORD Explorer 2016-2019 • • • • • • •...
  • Page 73 2 / 7 Page DESCRIPTION Trunk release switch on the dash Parking Ligts switch (  )PARKING LIGHTS (-)TRUNK RELEASE ( - )PARKING LIGHTS At steering column (-)HORN Ignition barrel Behind OBD-II connector left side of steering column. CAN2 LOW CAN2 HIGH At ignition barrel GROUND...
  • Page 74 3 / 7 Page WIRING CONNECTION T-HARNESS Yellow NOT CONNECTED Purple Purple/White Green CUT LOOP FOR AUTOMATIC White TRANSMISSION MODE. Orange Orange/Black (-)Horn Dk.Blue Red/Blue Lt.Blue/Black T-HARNESS In/Out Black (-)Parking Lights Pink Yellow/Black (-)Trunk Release Brown/White Pink/Black (-) Hood pin HOOD PIN Brown Purple/Yellow...
  • Page 75 4 / 7 Page KEY BYPASS PROGRAMMING PROCEDURE 1/3 Press and hold the programming button: Connect the 4-PIN Data-link harness (Black connector). HOLD  The LEDs will alternate between BLUE, RED,YELLOW LED may differ depending on the module casing. & BLUE/RED flashes. Release the programming button when the LED’s are RED and BLUE.
  • Page 76 5 / 7 Page KEY BYPASS PROGRAMMING PROCEDURE 2/3 Turn the ignition to the OFF position. TURN REMOVE remove the first key. FLASH RAPIDLY  The RED LED will turn ON solid. Turn the second functIonal WAIT TURN key to the ON/RUN position. 3 SEC ON/RUN KEY#2...
  • Page 77 6 / 7 Page KEY BYPASS PROGRAMMING PROCEDURE 3/3 Disconnect all connectors and after the 4-PIN Data-link harness (Black connector). Microsoft Windows Computer with Internet connection* Use the tool: FLASH LINK UPDATER* FLASH LINK MANAGER* FLASH LINK UPDATER or FLASH LINK MOBILE Smartphone* to visit the DCryptor menu.

Table of Contents