Safety instructions
Before using this product for the first time, it is crucial to carefully read and
understand all safety and operating instructions. Keep these instructions in
a safe place for future reference.
■ The installation must comply with all relevant local safety regulations and
electrical codes to prevent property damage or injury.
■ This product should be installed by a qualified electrician in accordance
with local building and electrical codes. Incorrect installation could pose
hazards and will void the warranty.
■ Ensure the mains power is turned off before installation to prevent the
risk of electrical shock.
■ Do not drop or shake the product, as rough treatment could damage the
internal electronic switch and the fine mechanics.
■ Users should never open this product other than intended, as opening or
removing covers poses the risk of electric shock or other risks.
■ Users do not need to carry out any maintenance on this product.
■ This product should only be installed in locations that provide adequate
ventilation. Do not cover the device, place objects on it, or insert objects
into the openings, as this can cause overheating.
■ The product must not be placed directly next to an open flame or
exposed to direct heat radiation, such as a radiator or direct sunlight.
■ It's important that the product is easily accessible.
■ If the product becomes damaged or defective, immediately disconnect
the power source and seek assistance from a qualified specialist.
■ Always connect this product to the grounding wire.
3
English
Need help?
Do you have a question about the BSM-PA4X-ODR and is the answer not in the manual?