Problem solving
The camera images don't appear, what to do?
■ Check the LED indicator on the outdoor camera adapter. If the LED
shows green, the adapter is successfully connected. Continue to the
next question. If the LED shows orange, the adapter is not connected
to the recorder adapter. Please check if the recorder adapter is
connected correctly.
■ In case the problem persists even after checking the above, please
get in touch with Bascom for assistance.
The green LED remains lit, but I don't see any images?
■ Check if the PA3 recorder adapter is connected to the right
connection on the recorder. It should be connected to one of the
camera connections on the recorder.
■ In case the problem persists even after checking the above, please
get in touch with Bascom for assistance.
The adapters are connected, but I don't see any images?
■ Connect the camera directly to the recorder by using a cable. Wait a
few minutes till the images appear and start using the adapters again.
■ In case the problem persists even after checking the above, please
get in touch with Bascom for assistance.
What is the transmission distance between the adapters?
■ The maximum transmission distance between adapters is 500
meters.
10
Need help?
Do you have a question about the BSM-PA4X-ODR and is the answer not in the manual?