NOTE
• The names shown here are always indicated in bold when they appear within the text of this manual.
1 VOLUME controller
2 FUNCTION button
3 SONG a, DEMO button
4 RECORDER (L) button
5 METRONOME (R) button
6 GRAND PIANO (MODERN), REVERB button
7 GRAND PIANO (CLASSIC), CHORUS button
FUNCTION Button
The FUNCTION button is used when configuring a variety of different digital piano settings. The following are
FUNCTION button basics.
To change a setting, hold down the FUNCTION button as you press the
keyboard key that is assigned the setting you want to select.
An operation confirmation tone will sound whenever you press a
keyboard key to configure a setting.
Example:
"To select a tone" on page E-7
NOTE
• For details about operations and settings, see "Configuring Settings with
the Keyboard" on page E-19.
The following table shows how pressing the FUNCTION button changes the operation of certain buttons.
This button:
SONG a
RECORDER
METRONOME
MODERN
CLASSIC
ELEC PIANO
Saving Settings and Using Operation Lock
Your digital piano lets you save its current settings and lock its buttons to protect against operation errors. For
details, see "Parameter List" on pages E-21 - E-23.
Does this while FUNCTION button is depressed:
Starts and stops demo tune play.
Selects the left-hand part.
Selects the right-hand part.
Toggles Reverb on (button lamp lit) and off (lamp unlit).
Toggles Chorus on (button lamp lit) and off (lamp unlit).
Toggles Duet on (button lamp lit) and off (lamp unlit).
8 ELEC PIANO, DUET button
9 USB port
bk DAMPER PEDAL jack
bl DC 12V terminal
bm POWER button
bn PHONES jacks
bo Pedal connector
General Guide
E-3