Page 1
Installation Guide Self-Rimming/Undercounter Lavatories K-2826 K-2827 K-2838 M product numbers are for Mexico (i.e. K-12345M) Los números de productos seguidos de M corresponden a México (Ej. K-12345M) Français, page “Français-1” Español, página “Español-1” 1053432-2-B...
For replacement installations, make sure the existing cutout is the same size or smaller than needed for the new lavatory. Kohler Co. reserves the right to make revisions in the design of products without notice, as specified in the Price Book.
Page 3
Use a pencil to trace the template on the countertop. Mark the faucet and handle centerline on the countertop. Cut out the opening by carefully following the pencil line traced from the template Go to the section that pertains to your style of installation. Kohler Co. 1053432-2-B...
Page 4
Get help lifting the lavatory into place. Temporarily position the lavatory in the countertop cutout so the ″Kohler″ logo is to the back. Verify proper fit and clearance. Remove the lavatory from the countertop. Install the faucet and drain according to the manufacturer’s instructions.
Page 5
If the countertop has not been installed, install it at this time. Drill the faucet holes according to the faucet installation instructions. Install the faucet to the countertop according to the faucet manufacturer’s instructions. Install the drain to the lavatory according to the drain manufacturer’s instructions. Kohler Co. 1053432-2-B...
Page 6
Connect and tighten the trap to the drain, and complete the water supply connections to the faucet according to the instructions packed with the faucet. Run water into the lavatory and check for leaks. Clean up with a non-abrasive cleaner. 1053432-2-B Kohler Co.
Need help?
Do you have a question about the K-2826 and is the answer not in the manual?
Questions and answers