Page 1
850T Robot Vacuum User's manual Smarter Mapping, Simpler Mopping. ·Please read this manual carefully before use ·The company reserves the right to interpret the instructions ·The appearance of the product is subject to change without notice. ·After reading, please keep it together with the invoice ·In case of product technology or software upgrade, without notice...
Page 3
Table of Contents Safety Warning ������������01-02 Avvertenze di sicurezza ���������49-50 Inside the Box ��������������03 Contenuti della confezione���������51 Product Description ����������04-06 Descrizione del prodotto ��������52-54 Product Operation �����������07-11 Operazione del prodotto ��������55-59 Product Maintenance����������12-14 Manutenzione del prodotto �������59-62 Product Specifications ����������14 Specifiche del prodotto ����������62 Troubleshooting������������15-16 Risoluzione dei problemi ��������63-64...
Page 4
• Keep the safety and user manual for future reference. If you accidentally lose the manual, you may visit the official website to download the electronic version. (https://www.proscenic.com). • Heed all warnings on the robot, battery, charging station, and user manual.
Page 5
Battery and Charging 1. Only use rechargeable battery packs with specifications approved by our company. 2. Use the standard complimentary charging base for charging. This product must not be used with any type of power adapter; the use of other power adapters will immediately void the warranty. 3.
Page 6
Zawartość Robot Charging Station Adapter Cleaning Brush Side Brush Remote Control Mop Pad Mop Pad Holder HEPA Filter...
Product Description The Robot Power/Clean Button Recharge Button Wifi Indicator Light Infrared Receiving Sensor Dust Outlet Dust Box Release Button Cliff Sensors Left Driving Wheel Side Brushes Charging Contacts Main Brush Cover Right Driving Wheel Omnidirectional Wheel Main Brush 2-in-1 Dust Box and Water Tank...
Page 8
Product Description Charging station Charging Station Indicator Light Charging Station Power Inlet Charging Contacts Recharge Room Clean Navigation Keys Start/Pause Spot Clean Edge Clean Suction Up Suction Down 0-16ft/0-5m Tips: 1. Install a pair of AAA batteries before using the remote controller. Ensure the correct polarity of batteries. 2.
Page 9
Product Description Robot Indicator Lights Power button/Clean button •Press and hold 3s to turn on/off. •Short press to start/pause cleaning. Recharge Button/ Recharge & Power Indicator • Press the button to return the robot to the charging station. Press and hold the recharge and power buttons at the same time for 5s to enter network configuration mode.
Product Operation Cleaning suggestions Take away objects such as clothes, loose paper, rope, power line and all fragile objects before using the vacuum cleaning robot. If the robot moves along and pulls out of power line, the line may move objects from table or shelf.
Product Activation Ensure the charging contacts of charging station is well matched with that on the robot. Put the product on charging station. Upon successful activation, the product will give out a series of “Di” sounds. The product can be used once the on/off key light is on. Start cleaning function Pause •...
Page 12
Cleaning Modes 1. Random cleaning Tips: The unit may not find charging station during recharging. If it is the case, the red light of unit will flicker and give out “Di” sound for four times. Please put the unit into charging station manually for charging.
Page 13
Product Operation Installation of the mopping module 1. Installing the mop pad 2. Fill with water Attach the washable rag to the mop pad holder Open the lid of the 2-in-1 dust box and water attachment area; tank, fill it with water and close it; 3.
flashes and the network converges. 2. Select the wifi router your phone is connected to, and enter the password. 3. Go to settings and WLAN list to connect to the hotspot "Proscenic-850-XXXX". 4. Go back to the Proscenic app and complete the wifi connection.
Page 15
Product Maintenance Cleaning of the Mopping Module Note: Mop and tank water stains need to be dried or wiped dry to avoid mould or odour.
Page 16
Product Maintenance 1. Clean the main brush. 2. Clean the sensors. 3. Clean the omnidirectional wheel. 4. Clean the side brush. 5. Clean the charging station.
Once a month Every 3-6 months (or when wearing is serious) Sensors Once a month Charging contacts Once a month Omnidirectional wheel Once a month Product Specification Name Parameters Model 850T Rated power Max. cleaning duration 100min Charging duration ≤6H...
Troubleshooting If the robot becomes faulty, LED red light will flicker or be always on and give out “Di” sound. Please confirm and resolve fault of the robot based on the following descriptions of sound and light. If fault cannot be removed by the instructions above, please feel free to contact our customer service specialists. Robot’s Indications Cause Solution...
Page 19
Faults Solution ·Remove all barriers within 3.3ft/1m at the left and right sides of and 6.6ft/2m in front of the charging station. Place The robot cannot come back to charging station as per the operating instructions. The robot charging station near charging station can return more quickly.
Need help?
Do you have a question about the 850T and is the answer not in the manual?
Questions and answers