Advertisement
Before attempting any repairs, the following should be observed,
Ensure that the correct tool is used and only use good quality hand tools. Ensure the work shop is clean and tidy. Always wear protective clothing, Overalls, safety gloves, safety glasses, safety hat/net etc. Check that guards function correctly, if not repair before running the product. Before turning product on for analysis carry out a visual check for loose/broken parts Including accessories, Remove accessories. Release tension on parts before attempting to remove, for example arm springs. Use Anti-Static control where necessary. Before repair ensure battery is removed.
KEY (LEGEND) of SYMBOLS
![]() | CHECK |
| ATTENTION! |
![]() | TURN COUNTER CLOCKWISE |
![]() | TURN CLOCKWISE |
![]() | MOVE IN THIS DIRECTION |
![]() | FUNCTION TEST |
![]() | LIFT OVER |
![]() | SEQUENCE |
![]() | DISCONNECT |
![]() | ATTENTION! REMOVE BATTERY |
![]() | CLEAN THE TOOL |
![]() | SEND THE TOOL TO THE CUSTOMER |
![]() | HOW DOES IT WORK? |
![]() | REPLACE |
![]() | USE STATIC PROTECTION DEVICE |
![]() | TORX HEAD SCREWDRIVER |
![]() | CHECK THE CHARGE OF THE BATTERY |
![]() | DATE CODE |
![]() | GO TO WEB SITE FOR MORE INFORMATION |
![]() | SAFETY GLOVES |
![]() | SAFETY GLASSES |
![]() | See Warranty Assessment |
![]() | Warranty Accepted |
![]() | Warranty Rejected |
![]() | ASSEMBLY |
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the DCN660 and is the answer not in the manual?
Questions and answers