Product Description - biOrb Heater Set Operating Instructions Manual

‐ EN ‐
 Route cables such that they are protected
from damage and do not present a tripping
hazard.
 Only open the unit housing or its attendant
components if this is explicitly specified in the
operating instructions.
 Only carry out work on the unit that is de‐
scribed in this manual. If problems cannot be
overcome, please contact an authorised cus‐
tomer service point or, if in doubt, the manu‐
facturer.
 Only use original spare parts and accessories
for the unit.
 Never carry out technical changes to the unit.
 Only use heaters that are approved for use
aquariums. Suitable heaters meet the re‐
quirements in accordance with EN 60335‐2‐
55.
 Protect the plug connection from moisture.
 Only connect the unit to a correctly fitted
socket.
18
Symbols used in these instructions
C A U T I O N
 Indicates a possibly hazardous situation.
 Non‐observance may lead to slight or minor
injuries.
N O T E
Information for the purpose of clarification or
for preventing possible damage to assets or to
the environment.
Additional information
 A
Reference to a figure, e.g. Fig. A.
PRODUCT DESCRIPTION
 Check that the contents are correct, complete
and undamaged.
 A biOrb Heater Set
1 Heater
2 Thermometer with suction cup
3 Operating instructions Heater Set
4 Suction cup for holder
5 Holder for heater
Number
1
1
1
2
1
biOrb Heater Set