Evolveo Smart TV stick D2 Quick Start Manual

EN
Dear Customer,
thank you for choosing the EVOLVEO Smart TV stick D2.
We hope that it will bring you lots of fun and satisfaction.
Specifications
Processor Dual Core 1.6 GHz
Wi-Fi 802.11 b/g/n
Operating system Android 4.2
Description
Start
• For connection of this product to WiFi, the location in the direct visibility of the most commonly
used Access points not beyond 6 meters is necessary. The WiFi signal strength indicator is only
informative for this product. Having trouble with the WiFi connection, reduce the distance from
the Access point.
• Connect your new EVOLVEO Smart TV stick D2 to HDMI port on your TV. Power with the 230V
adapter or use the USB port on your TV (at least 1 A current output).
• EVOLVEO Smart TV stick D2 supports the 2.4 GHz wireless standard for keyboard or mouse
connection. The most convenient control is with the EVOLVEO FlyMotion remote control (not
included in the standard package).
• When the system is loaded, click on the small white box made up of six squares in the upper right
corner to open the "Applications" menu.
• Click on the „Settings" icon.
• Go back to the menu on the left side of the screen, until you reach the "Wi-Fi" tab under
"WIRELESS AND NETWORK". Then turn the switch in the upper right corner on and after a few
seconds, select your wireless network, enter your security password and wait until your
device connects to your home network.
RAM: 1 GB / ROM: 4 GB
microSDHC slot
A. USB port for connection of dongle wireless
keyboard or mouse
B. microUSB
C. microUSB for power connection from TV USB
port or 230V charger
D. microSDHC slot for memory card
E. Function key for firmware upgrade