leadsun VertHex User Manual

Solar street light

Advertisement

Troubleshooting
No.
Symptoms
Troubleshooting steps
Check if the light can be manually
activated.
Check if the solar panel is obstructed
by houses, trees, or other objects.
1
No light at night
Check if any artificial light sources are
shining near the solar panel at night.
Examine the status of each component
according to the Maintenance Guide.
Check if the solar panel is obstructed
by houses, trees, or other obstacles.
A serious shortage
Check if the surface of the solar panel
2
of working time
is dusty or covered.
Examine the battery pack for damage,
following the Maintenance Guide.
The light is not operating according to the preset working
3
mode, including turning on and off.
Check if the air temperature is close to
human body temperature.
The light
brightness is
incorrect when a
4
person approaches
Check if the product is installed too
(this applies only to
high.
products with
motion sensors).
LEADSUN INC.
LEADSUN Australia PTY LTD
Address: 42 Greens Road,
Address: 865 S Milliken Ave, Unit G,
Dandenong South, Victoria 3175
Ontario, CA 91761 USA
Phone: +1 (909) 476-0900
Phone: +61 1300 281 005
Fax: +61 3 8610 0393
Email: sales@leadsun-us.com
Email: sales@leadsun.com.au
Made in China
Process
Refer to the "Product Activation" and "Product
Installation" sections in this user manual and
perform activation tests.
Clear any obstructions or consider changing the
installation location.
Remove any interfering artificial light sources or
change the installation location.
Replace any damaged components.
Clear any obstructions or consider changing the
installation location.
Clean the surface of the solar panel as
described above.
Replace any damaged battery.
Reprogram.
When the air temperature is close to the human
body temperature, motion detection may slow
down. It will return to normal once the air
temperature changes.
If the installation height exceeds 8 meters, it
may be outside the motion detection range. It is
recommended to lower the height or use other
operating modes.
Replace any damaged motion sensors or
controllers.
LEADSUN Global Limited
Address: 3/F, No.1 Workshop, No.15,
Pingbei 2nd Road, Nanping, Zhuhai,
Guangdong, P.R. China 519060.
Phone: +86-756-2289712
Email: sales@leadsunglobal.com
Thank you for choosing LEADSUN's solar street light. If you have any questions,
please consult our customer service at sales@leadsunglobal.com.
LEADSUN reserves the right to update the product's appearance, function, and
construction without notice. In case of discrepancies between the illustration or
description and the actual product, please refer to the actual product. LEADSUN
ensures the accuracy and reliability of this manual but is not responsible for any
loss or damage resulting from the use or operation of the product.
VSR.124-A
VertHex
Solar Street Light
User Manual
www.leadsunglobal.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VertHex and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for leadsun VertHex

  • Page 1 User Manual Replace any damaged motion sensors or controllers. Thank you for choosing LEADSUN's solar street light. If you have any questions, please consult our customer service at sales@leadsunglobal.com. LEADSUN INC. LEADSUN Australia PTY LTD LEADSUN Global Limited...
  • Page 2 Cautions Product Maintenance Before using the solar street light, carefully read the follow precautions to avoid damage or error. To ensure the solar panel receives light efficiently, regularly clean the surface of the solar panel with clear water to remove dirt or marks. Do not use chemicals or abrasives, including chlorobenzene.
  • Page 3: Part Description

    Part Description Luminaire (Optional): Check if you have all the components listed below before installation, the components and quantity of each set are as follows: Freedom Classic LED Street Light Freedom Plus LED Street Light Solar Panel Components: MPPT Controller with Battery: M8 Screw 6pcs PV Extension M8 Screw 6pcs...
  • Page 4: Product Activation

    Type B USB Port of Controller In case you have any difficulty determining the indicator lights’ status, please record a short video of the indicator lights in operation and send it to Leadsun team for further For program input. analysis.
  • Page 5: Before Installation

    Then connect the M16 male connector of the extension cable to the M16 female connector of the solar panel. As VertHex solar panel will fit into shown in Picture 2-1. A spare opening the light pole from the top.
  • Page 6 Don't touch it by any other hard objects or drop it to extension cable connectors. prevent breakage. Leadsun shall not be held liable for any M8 Screw damages incurred during the installation process. 2. Installation of the first solar panel, as shown in Picture 3-2.
  • Page 7 Luminaire Installation Bell-shaped Luminaire Installation V-shaped LED Garden Light Installation 1. Cantilever installation: Φ12 Thread the LED and PIR extension cables through the cantilever, then enter from the top of the pole and extend out from the door Φ42 Pay attention to the at the bottom.
  • Page 8: Battery Installation

    Freedom Plus Installation Battery Installation 1. Cantilever installation: 1. Open the door at the bottom of the lamp pole, and connect the PV cable, LED cable, and PIR cable respectively, as shown in Picture 7-1. Once all cables are properly connected, in the day Thread the PV extension cable through the cantilever, then connect it to the PV cable of the the product will activate automatically.

Table of Contents