leadsun AE3C User Manual

Solar street light
Hide thumbs Also See for AE3C:

Advertisement

Quick Links

Troubleshooting
No.
Symptoms
Troubleshooting steps
Check that the lamp can be manually
activated.
Check if the solar panel is blocked
from the sunlight by houses, trees and
other obstacles.
1
No light at night
Check if there is any artificial light
source(s) shining on the solar panel
during the night.
Examine status of each component
based on the repair guide.
Check if the solar panel is blocked
from the sunlight by houses, trees and
other obstacles.
A serious shortage
Check if the surface of the solar panel
2
of working time
is dusty or covered.
Examine if the battery pack is
damaged as per the repair guide
instructions.
Lighting does not
Check if the working mode setting
follow the normal
3
correct
operating mode of
turning on and off
Check if the air temperature close to
human body temperature.
Lights fail to turn
4
on properly when
Check if the installation height is too
humans approach
high.
LEADSUN INC.
LEADSUN Australia PTY LTD
Address: 42 Greens Road,
Address: 1920 S. Archibald Ave.
Dandenong South, Victoria 3175
Suite I, Ontario, CA 91761
Phone: +61 1300 281 005
Phone: 909.476.0900
Fax: +61 3 8610 0393
Fax: 909.466.0130
Email: jeoffc@leadsun.com.au
Email: sales@leadsun-us.com
Made in China
Process
Refer to "Activation and Installation" section
on this user guide and run activation tests.
Clear obstructions or change installation
location.
Remove the artificial light source(s) of
interference or change the installation
location.
Replace the damaged component(s).
Clear obstructions or change installation
location.
Clean the surface of solar panels as
detailed above.
Replace damaged battery.
Contact the dealer/supplier
When the air temperature is close to human
temperature, motion detection may slow
down. It will return to normal after the air
temperature changes.
It is out of motion detection range when
installation height exceeds 8m. It is
recommended to reduce the height or use
other operating modes.
Replace damaged motion sensor or
controllers.
LEADSUN Global Limited
Address: No.1 Workshop, No.15, Pingbei
2nd Road, Nanping, Zhuhai City,
Guangdong Province, P.R. China,
China 519060.
Phone: +86-756-2289712
Fax: +86-756-8682090
Email: sales@leadsunglobal.com
AE3C
Solar Street Light
User Manual
Thank you for choosing LEADSUN's solar street light.
If you have any question, please consult our customer services
sales@leadsunglobal.com.
LEADSUN
reserves the right to update product appearance, function
and construction without notice.
For any discrepancies in illustration or description, please refer to
individual/real objects.
LEADSUN assures the accuracy and reliability of this manual, but is
not responsible for any loss or damage related to any operation of the
products.
A3C.045-B
www.leadsunglobal.com

Advertisement

Table of Contents
loading

Summary of Contents for leadsun AE3C

  • Page 1 Phone: +61 1300 281 005 Guangdong Province, P.R. China, Phone: 909.476.0900 LEADSUN assures the accuracy and reliability of this manual, but is Fax: +61 3 8610 0393 China 519060. Fax: 909.466.0130 not responsible for any loss or damage related to any operation of the Email: jeoffc@leadsun.com.au...
  • Page 2 0℃ to 60℃). The product with heating function can work from -40℃ to 60℃. All internal parts of AE3C are waterproof and rated IP65. Holes and slits on the luminaires are designed for heat dissipation and drainage. Metal parts are made of...
  • Page 3: Part Description

    Type A USB connector female For battery charging via 14VDC 1.5A power supply Bird spike Prevents solar panel contamination from bird droppings Mounting bracket Fix AE3C unit Street light bracket Use to fasten the LED street light Standard Reset button...
  • Page 4: Part List

    Daytime: While connect the LED street light to solar engine, it lights 20 seconds and then Off. It means the AE3C has been activated automatically. Solar Engine: At Night : Press the button for 5s , the light is on. Short press the button, the light will be switched between ON and OFF.
  • Page 5: Before Installation

    Before Installation 1. Installation Direction of Solar Panel 3.How to place the Gateway ? Each Gateway covers a range from 800m to 3000m, depends if there are barriers to block signal Please choose the appropriate model depending on the sunlight intensity of the place and transmission.
  • Page 6: Product Installation

    Picture 7) the light is to be installed for threading waterproof cables. (See Picture 4) Joint the bracket to the AE3C unit. Thread Ø25 cables from the hole of bracket and set a proper angle that solar panel can obtain maximum energy from the sun (each scale on the bracket is 6 degree).
  • Page 7 At factory setting, AE3C units turn on at dusk and off at dawn automatically (light photosensitivity is around 30lx). In the evening, AE3C units operate at dim mode when no one is not around, and increase light output immediately when motion is detected, to conserve battery power.
  • Page 8 A. For APPLE users please go to the APP STORE and install the APP 'LEADSUN · The solar panels of this product should be considered as fragile. There should never be more EDGE' .

Table of Contents