Delta FlushIQ How To Use

Sensor Display Alerts
Blue
Normal operation-toilet is
performing a flush/fill cycle.
Yellow
Leak detected.
Flashing Yellow
Leak detected.
(Tank fill failure.)
Flashing Red & Blue
Overflow level detected.
Toilet will not flush.
Flashing Red
Low battery indication.
Flashing Blue
Toilet is in sleep mode.
Toilet will not flush.
How to Change the Batteries
AA Batteries C Batteries
Remove lid by twisting Remove box lid
latch and pulling. adapter to install "C"
Install 4 "AA" batteries batteries for longer
in orientation shown. battery life. Reinstall lid.
Note: Positive terminals are to the left and negative
terminals are to the right.
How to use your
How to Flush
Manually
Lift off tank lid and push
and
down on the red, manual
flush rod . The tank will
not automatically refill
after manual flush.
FlushIQ
Sleep Mode Learn More
about FlushIQ™
For more help visit
To enter Sleep Mode:
Touch sensor for www.deltafaucet.com/toilet.
7 seconds.
(Toilet
To find product information visit
will not flush while in
www.deltatoilet.com/FlushIQ
sleep mode. Use for
or scan the QR code to
cleaning, etc.)
automatically take you to our
product videos.
To exit Sleep Mode:
Touch sensor for
7 seconds or wait
for the 10 minute
time out.
™
76688 Rev. A