Camera Recording - Panasonic Palmcorder PalmSight PV-L558 Operating Instructions Manual

r
2.
E
Camera Recording
Before you begin...
¢ Connect the Camcorder to a power source.
* Insert a cassette with record tab (see page 12).
1 Set the POWER switch to CAMERA.
The built-in Lens Cover opens.
- EVF
* Make sure the
POWER switch is PAUSE
fully rotated to
the CAMERA
position.
Record/Pause
mode.
2 With the Viewfinder Eye Cup
against your eye, adjust the Vision
Adjustment Control to your eye-
sight.
uone 2156
cJ aas the TAPE SPEED Selector to
SP or SLP (refer to page 12).
A press RECORD/PAUSE to start
recording.
The Tally Lamp and REC Indicator are
lit during recording.
RECORD
Press the RECORD/PAUSE again to
pause the recording.
Set the Power switch to OFF after
Note: recording is finished.
* When your Camcorder is aimed at excessively < To remove the cassette
bright objects, or bright lights, a vertical bar In Record/Pause mode. slide the TAPE
may appear in the picture. This is a normal EJECT switch trefer t : i2
characteristic of the CCD pick-up device. Try J switch (refer to page 12).
to avoid this when possible.
23