Related Manuals for CAME KMS SimpleKey 4
Summary of Contents for CAME KMS SimpleKey 4
- Page 1 SimpleKey 4 Communications Module IP (CM-IP) CONNECTION GUIDE connection GUIDE This guide will cover the connection of a SimpleKey 4 System Controller over a local IP network. TO BE READ IN CONJUNCTION WITH THE FULL INSTRUCTION MANUAL...
- Page 2 Real time connection status LED indicators. CM-IP Configuration By default, the CM-IP has been setup by CAME KMS to automatically configure itself within the local network using DHCP. Advanced network configuration is possible via a configuration file stored on the micro SD card. Each micro SD card is unique and tied to the CM-IP by KMS during production.
- Page 3 CAME KMS Technical Support for further support. Note: CAME KMS cannot be held responsible for the site based LAN infrastructure. The installer must ensure correct installation and configuration. It is the installers responsibility to maintain such a network and advise CAME KMS if...
- Page 4 YOU MAY NOT EVEN PARTIALLY REPRODUCE THIS DOCUMENT CAME RESERVES THE RIGHT TO MAKE ANY CHANGES TO THIS DOCUMENT AT ANY TIME THE DATA AND INFORMATION SHOWN IN THIS CATALOGUE ARE SUBJECT TO CHANGE WITHOUT OBLIGATION TO GIVE PRIOR NOTICE BY CAME S.P.A, E&OE CAME S.p.A.
Need help?
Do you have a question about the KMS SimpleKey 4 and is the answer not in the manual?
Questions and answers