Strain Relief Bushing Kit, 24X190; Installation; Hose Straps (4 Pack), 240296; Pressure Gauge Replacement Kit, 24U635 - Graco InvisiPac HM25 Instructions Manual

Ref. Part Description
1 127922 FITTING, 3/8 npt(m) x M18(f)
2 127923 FITTING, 1/4 npt(m) x 10 mm
tube
3 127924 FITTING, 1/4 npt(m) x 10 mm
90° elbow tube
4 127925 FITTING, 3/8-18 npt (m) x
3/8-19 bspt (f)
Strain Relief Bushing Kit,
24X190
The strain relief bushing kit allows the use of a smaller
outside diameter (OD) power cord. This strain relief
bushing is intended for power cords with an OD of
0.512-1.024 in (13-26 mm).

Installation

1. Remove standard strain relief bushing (106). Retain
and reuse nut.
2. Install strain relief bushing from kit and secure with
retained nut.

Hose Straps (4 Pack), 240296

Use these straps to secure hoses without excessive
pinching.
333347ZAC
Qty. Ref. Part
1 1 114271 STRAP, retaining
1
Pressure Gauge Replacement
1
Kit, 24U635
1
To replace the air gauge glass lenses and glass fuses
used in the food or beverage industries.
Ref. Description
1 GAUAGE, pressure, acrylic
2 TOOL, puller, fuse
3 FUSE, 250v, 8a
400VAC and 480VAC
Transformer Kits
Use one of these kits to transform higher voltage
power (400VAC or 480VAC) to 240VAC.
Kit Description
127567 KIT, 400VAC Transformer
127568 KIT, 480VAC Transformer

Adapter Cable

Part Description
128621 Adapter cable allows non-Graco Ni120 RTD
Hoses to be used on InvisPac
Description
Qty.
Accessories
Qty.
4
2
1
32
125