Multi-position ahu outdoor unit, central split air handler air conditioning system (17 pages)
Summary of Contents for Olmo SIERRA OS-09SRW-115VI
Page 1
WALL MOUNTED MINI SPLIT AIR CONDITIONING SYSTEM Installation Manual Models: OS-09SRW-115VI OS-SR09-115VO OS-12SRW-115VI OS-SR12-115VO OS-09SRW-230VI OS-SR09-230VO OS-12SRW-230VI OS-SR12-230VO OS-18SRW-230VI OS-SR18-230VO OS-24SRW-230VI OS-SR24-230VO OS-36SRW-230VI OS-SR36-230VO IMPORTANT NOTE: Thank you for purchasing our air conditioning system. Please read this manual carefully before operating your new air conditioning units. Make sure to save this manual for future reference.
Safety Instructions , • 1. To guarantee the unit work normally, please read the manual carefully before installation, and try to install strictly according to this manual. • 2. Do not let air enter the refrigeration system or discharge refrigerant when moving the air conditioner.
Installation Instructions Site Instructions Site for Installing Indoor Unit • Where there is no obstacle near the air outlet and air can be Indoor unit easily blown to every corner. Pipe length is as follows, • Where piping and wall hole can be easily arranged. For 15K and below15K: 20 meters (65.6ft) Max.
Page 19
Installation Instructions Indoor Unit Installation 1. Installing the Mounting Plate r··--------------------------------------------------------------------------------------------------------------- FOR the Ordinary Mounting Plate • Decide an installing location for the mounting plate according to the indoor unit location and piping direction. Note: it is recommended to install screw anchors for sheet rock, concrete block, brick and such type of wall. •...
Page 20
Installation Instructions FOR the Ordinary Mounting Plate MOUNTING BRACKET DIAGRAMS AND DIMENSIONS (Recommended) Indoor unit outline 200mm/7.9in or more toceiling � r- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -------- - - 50mm/2in or more to wall: 50mm/2in...
Page 21
Installation Instructions Indoor Unit Installation r················································································································· FOR the Wooden Wall Mounting Plate • Decide an installing location for the mounting plate according to the indoor unit location and piping direction. Note: it is recommended to install screw anchors for sheet rock, concrete block, brick and such type of wall. •...
Page 23
Installation Instructions Indoor Unit Installation Hole in wall for interconnecting Piping, Drain & Wiring 2. Drill • Decide the position of the hole for piping according to the location of mounting plate. Wall hole sleeve • Drill a hole in the wall. The hole should tilt a little ( hard polythene tube downward toward outside.
Page 24
Installation Instructions �::3� Indoor Unit Installation • Piping Joints Thermal Insulation: Wrap the piping joints with thermal I I I I I l'"'�I I I I I I insulation materials and then wrap with a vinyl tape. wrapped with vinyl type Thermal insulation •...
Need help?
Do you have a question about the SIERRA OS-09SRW-115VI and is the answer not in the manual?
Questions and answers