Table of Contents
Advertisement
Care and Maintenance
Refitting the Cover
To refit the cover, reverse the above directions. Make sure that the
shoulder straps are not twisted, and are threaded properly through the
chest clips, cover, foam, and shell.
Cleaning the Cover
•
HAND WASH using cold water and mild soap.
•
LINE or LIE-FLAT DRY to prevent the cover from shrinking.
•
DO NOT
bleach, machine wash, machine dry or iron.
Cleaning the Shell
•
SPONGE CLEAN using warm water and mild soap.
•
TOWEL DRY
•
DO NOT
use solvents or abrasive cleaners.
Cleaning the Harness
•
SPONGE CLEAN using warm water and mild soap.
•
TOWEL DRY
•
DO NOT
bleach, machine wash, machine dry or disassemble the
harness.
Cleaning the Harness Adjuster
Periodically check the adjuster area to be sure it is clean and free of
food, drink, and other debris. If debris is present, it must be removed
to prevent interference with the adjuster mechanism.
•
BRUSH AWAY LOOSE DEBRIS using a soft-bristled brush.
•
SPONGE CLEAN using warm water and mild soap.
•
TOWEL DRY
•
DO NOT
use solvents, abrasive cleaners or disassemble the harness.
34
Harness Buckle Removal
1
Recline the child seat.
2
Locate the metal buckle strap retainer on the
bottom of the child seat.
3
Pull the retainer away from child seat to
loosen.
4
Turn the retainer so the short side will go
through the slot in child seat shell (Fig. A).
5
Push the retainer through slots in the shell
and cover to the top of the child seat.
Re-threading the Harness Buckle
1
Locate slot in cover and shell for harness buckle.
2
Turn the buckle retainer so the short side will fit through the slot in the
cover and child seat shell (Fig A).
3
Push the retainer through slots in the shell and cover, to the bottom
of the child seat.
4
Pull harness buckle away from child seat until tight and verify the strap
is not twisted and the release button is facing outward.
Care and Maintenance
A
35
Advertisement
Table of Contents
