Keychron K5 Max User Manual page 16

Bluetooth Mode
•
Switch the mode toggle switch to the Bluetooth position.
•
When Bluetooth mode is activated, the keyboard's backlighting will automatically turn on,
indicating that the mode is active.
•
To pair the keyboard with your device, press and hold "fn" + "1" for approximately 4
seconds. The Bluetooth indicator will begin flashing rapidly, signaling that the keyboard is in
pairing mode. This flashing will continue for 3 minutes to allow the keyboard to detect
nearby devices.
•
On your device, search for the Bluetooth device labeled "Keychron K5 Max" in your
Bluetooth settings. Select it to establish the connection. Once the pairing process is
complete, the Bluetooth indicator will turn off.
•
This keyboard supports pairing with up to three Bluetooth devices simultaneously. To switch
between paired devices, use the key combinations "fn" + "1", "fn" + "2", and "fn" + "3"
respectively.
•
The Bluetooth indicator will flash continuously during the pairing window, which lasts for 3
minutes. After this time, the keyboard will exit pairing mode if no device is connected.
•
Note: Connection issues may arise due to differences in Bluetooth versions or device
settings. Ensure all relevant settings on your device are correctly configured to enable
seamless pairing.
Switching Between Bluetooth Devices
To easily switch between Bluetooth devices, you can use the keyboard's multi-device pairing feature.
After pairing your Keychron K5 Max with multiple devices (up to three), you can seamlessly toggle
between them:
•
Use the key combinations "fn" + "1", "fn" + "2", or "fn" + "3" to switch to a specific paired
device.
•
Press the respective combination briefly, and the keyboard will automatically reconnect to
the selected device if it is within range and Bluetooth is active.
This feature allows you to manage multiple devices efficiently, such as a computer, tablet, and
smartphone, without the need for repeated pairing.
16