Sharp SH-920 Instruction Manual page 3

Avoid using any improper work pieces.
1.
The grinder can only be operated or maintained by eligible persons who
2.
have trained for handling grinding machines.
On-site safety training is required for both operators and troubleshooters.
3.
The buyer shall remind their operators to follow the safety instructions at
4.
all times.
Please read the instruction thoroughly before using the machine.
5.
are any queries about the machine, please contact our local
representatives or us directly. Do not attempt to overcome any machine
problems by yourself.
Make sure the main power source of machine is properly shut down during
6.
maintenance.
Do not measure, move or exchange work pieces when a working table is
7.
moving or the wheel is rotating / approaching to the work pieces.
DONT remove grits or dirt from machine until the grinding process is fully
8.
finished.
Before turning on the spindle, make sure the grinding wheel is fastened on
9.
the spindle and the rotating direction of wheel is matching the direction on
the cover. Let the wheel run idly for at least 5 minutes before grinding any
work pieces.
10. Be familiar to all switches, especially the emergency stop button.
11. Goggles, masks and working boots are required while operating
machines.
12. Neckties, gloves, and unsuitable work suits like long sleeves and loose
garments are not allowed while operating the grinder.
13. Hair tie or hat is required for longhaired operators.
14. Keeping a clean and dry environment around machine can prolong the
machine service life.
15. Keep the chuck surface clean. If it is scratched, re-grind it immediately.
16. It is obligated to wear gloves while loading sharp work pieces. Please use
cranes for loading bigger-sized work pieces, especially the ones are over
25 kg.
SAFETY INSTRUCTIONS
P.3 OF 70
If there