Sharp SH-920 Instruction Manual page 29

SA0: Emergency stop.
SB1: Main power "ON".
SB0: Main power "OFF".
SB01: Door unlock.
SA100: Electro-magnetic chuck switch for magnetization and demagnetization.
DL100: Chuck magnetization / demagnetization display.
RP101: Demagnetization time.
RP102: Adjustment for magnetic attraction.
SB11: Grinding wheel "ON".
SB10: Grinding wheel "OFF".
RP11: Grinding wheel speed adjuster.
RPM: Grinding wheel speed meter.
RP12: Auto dressing speed adjuster.
SB21: Hydraulic motor "ON".
SB20: Hydraulic motor "OFF".
SA31: Auto / manual cross feed selections.
SB31: Cross feed forward button.
SB32: Cross feed backward button.
SB33: Cross feed stroke adjuster by electronic one touch system.
RP31: Cross feed rate adjuster.
SA32: Criss-Cross grinding switch.
RP32: Criss-Cross speed adjuster.
SB4: Button for grinding wheel upward movement.
SB14: Button for grinding wheel downward movement.(Press SB40 & SB14 together)
SB40: Button for grinding wheel downward movement.(Press SB40 & SB14 together)
SA5: Dust suction "ON" / "OFF".
SA6: Coolant system "ON" / "OFF".
SA9: Servo system "ON" / "OFF".
FUNCTIONS OF PANEL
( STANDARD / WITH AD1)
(SA100 must magnetic)
P.29 OF 70