Hasselblad CFV User Manual page 49

1
3
5
7
9
2
4
6
8
500
For use with 500C/CM, 501C/CM and 503 CX/CXi/CW mod-
els.
• Make a 500 setting.
Shutter Delay
There can be differences in the amount of time required in prepara-
tion (raising the mirror, opening/closing the shutter etc) for digital
capture between various camera models. This corrective feature
adjusts the time a little to ensure the image is read out from the
sensor. The normal setting is Default and should only be changed
if problems are encountered.
Exposure Time
This setting should be changed for cable-free exposure times longer
than 1/8 second, ensuring that it matches the set shutter speed on the
lens. The settings range from 1/8 second to 32 seconds (1/8 second
is the default setting). The ELD also has a "Bulb" setting.
Capture Sequence
This feature functions in the same manner as an interval timer
and only works in conjunction with a motor or winder driven
camera model except in the case of the Pinhole setting where it is
the only way of controlling such exposures (see later section for
full details).
Initial delay: Controls the amount of time required to elapse before
the first exposure.
Delay: Controls the amount of time required between each ex-
posure.
Count: Controls the total number of exposures required.
Setting CAMERA model and options
Proceed as follows:
1. Press the menu (MENU) button to open the menu.
2. Use  and  to select the SETTINGS sub-menu.
3. Press  to open the SETTINGS menu.
4. Use  and  to select CAMERA.
5. Press  to open the CAMERA menu.
6. Press either the or
7. Use  and  to select SHUTTER DELAY or EXPOSURE
TIME if required.
8. Press either the or
required.
9. Press the menu (EXIT) button to exit the menu system and
keep your settings.
49
button to select camera model.
button to make new settings if