Hasselblad CFV User Manual page 17

1
3
5
Menu Shortcuts !
To help you work faster, the digital back provides shortcuts to some
of the most commonly used menu commands that do not otherwise
have a dedicated button on the front panel. These are accessible by
The following shortcuts are available:
• To set the browse filter
• To delete images
• To toggle the overexposure indicator
2
4
6
Press and hold until your preferred filter is indicated.
• See also Using Instant Approval Architecture.
Select the target image and then press and hold  until the delete dialog opens.
• See also MAIN MENU / Delete.
Press and hold  until the display begins to flash (or stops flashing) its overexposed areas.
• See also Overexposure Indicator.
In this manual you will see the following kind of description
regarding settings changes (as opposed to general viewing and
browsing etc).
The method is the same for all changes, some stages taking a little
longer than others and being a little more involved.
The following is an example of a setting change :
Setting the menu language
The menu is available in English, French, German, Italian,
Spanish, Japanese and Chinese.
To choose any of the above languages, proceed as follows:
1. Press the MENU/EXIT (
2. Press the NAVIGATOR button ( and ) to select the
SETTINGS sub-menu.
3. Press the NAVIGATOR button () to open the SETTINGS
menu.
4. Press the NAVIGATOR button () to select the USER
INTERFACE sub-menu.
5. Press either ZOOM button (
guage (in this case, Spanish).
6. Press the MENU/EXIT (
pressing and holding one of the front-panel buttons for a second or so.
These are mentioned where appropriate elsewhere in this manual, but
we summarize them here for your convenience.
17
) button to open the menu.
or ) to choose a new lan-
) button again to close the menu.