Advertisement
Care and cleaning
Always switch off at the power outlet, and
then unplug the appliance from the power
outlet before cleaning.
removable filter
The ikon™ Quiet Boil Kettle features a
removable mesh filter to filter out scale
deposits for cleaner water. To remove the scale
deposits remove the filter by opening the lid
and lifting up and out of the kettle.
The filter can be cleaned by running under
hot water and rubbing with a cleaning cloth or
brush.
To replace filter, simply slide the filter down
into the slot behind the spout of the kettle.
removal of mineral deposits
Mineral deposits in tap water may cause the
kettle interior and water gauge to discolour
over time. This may be removed by using a
proprietary kettle descaler which is available
from most leading supermarkets, department
stores and hardware stores.
To prevenT damage To The applianCe, do noT use alKaline Cleaning agenTs when
Cleaning. use a sofT CloTh and mild deTergenT.
do noT remove The diffuser ring loCaTed inside The KeTTle.
never immerse The KeTTle Base, swiTCh area, power Base or power supply power
Cord in waTer, or allow moisTure To Come in ConTaCT wiTh These parTs.
8
Alternatively:
1.
Fill the kettle until ⁄ full with 1 part
vinegar and parts water. Boil and allow to
stand overnight.
.
Empty the solution from the kettle. Fill the
kettle with clean water, bring to boil and
discard the water. Repeat and the kettle will
be ready for use.
To clean the exterior
The outside of the kettle may be wiped over
with a damp cloth and polished with a soft dry
cloth.
do not use chemical, steel wool, or abrasive
cleaners to clean the outside of the kettle.
Note
notes
9
Advertisement
