Advertisement
PAGE HEADER.....
OPERATING YOUR BREVILLE PRODUCT
1.
If the KEEP WARM function has been
selected, the KEEP WARM button
surround will remain illuminated in red,
the selected temperature button surround
will remain illuminated in white, and the
kettle will maintain the desired setting for
20 minutes.
2.
If further heating of the kettle is not
required, switch Off at the power outlet,
unplug the power cord and empty the
water from the kettle. Replace the kettle
onto the power base and close the lid.
NOTE
The default temperature setting of the
kettle when switched On at the power
outlet is 100°.
− When the kettle is switched Off at
the power outlet and switched back
On, it will automatically default to
the 100° temperature setting.
− When the kettle remains switched
on at the power outlet and different
temperature settings have been
selected, the kettle will default to the
last selected temperature setting.
NOTE
This kettle must be used only
with the power base supplied. Use
caution when pouring water from your
kettle, as boiling / heated water and
steam will scald. Do not pour the water
too quickly.
12
NOTE
Always fill the kettle to between the
minimum (MIN 500) and maximum
(MAX 1700) marks on the water window
on the kettle. Filling above the maximum
mark on the water window of the kettle
may result in boiling/heated water
splashing from the kettle.
SAFETY BOIL DRY PROTECTION
The kettle is fitted with a safety device, which
protects against overheating should the
appliance be operated with insufficient water.
If this occurs the kettle will stop heating.
Switch Off at the power point and allow kettle
to cool before refilling. The safety device will
automatically reset when the kettle has cooled
down.
CARE & CLEANING
PAGE HEADER.....
CARE & CLEANING
Always switch off at the power outlet and
unplug the appliance from the power outlet
before cleaning.
NOTE
The concealed element in the base of the
kettle is made from high quality stainless
steel. Any brown stains appearing are the
results of mineral deposits and are not
rust.
REMOVAL OF MINERAL DEPOSITS
Mineral deposits in tap water may cause the
kettle interior and water window to discolour
over time.
We recommend the use of a proprietary
de-scaler such as the Breville Kettle Cleaner to
remove scale build up and stains.
BREVILLE KETTLE CLEANER
Directions for use:
1.
Add 125ml of Breville Kettle Cleaner
to 2 litres of water.
2.
Fill kettle with mixture on a
protected surface.
3.
Bring kettle to boil and let stand for
30 minutes.
4.
Clean spout by using a cloth dampened
with Breville Kettle Cleaner, rub well. Then
wipe off.
5.
Bring the kettle to boil for a second time,
then empty solution.
6.
Fill kettle with fresh water and bring to the
boil, discard boiled water. Now your kettle
is ready to make your next cup of tea or
coffee.
TO CLEAN THE EXTERIOR
The outside of the kettle should be wiped with
a damp cloth then polished with a soft, dry
cloth.
NOTE
Do not use chemicals, steel wool, or
abrasive cleaners to clean the inside or
outside of the kettle.
STORAGE
Ensure the kettle is switched off, clean and dry
before storing. Ensure that the lid is closed and
locked securely into place. Wrap the power
cord around the power cord storage under the
power base. Stand the kettle upright on the
power base. Do not store anything on top.
13
Advertisement
