Xiaomi Smart Humidifier 2 User Manual page 7

How to Use
• Connecting to power: Plug the humidifier into an electrical outlet that meets the humidifier's requirements. When the
humidifier makes a beep, it is in standby mode.
• Turning on/off: Press the power bu on to turn on/off the humidifier. When turned on for the first time, the humidifier
is at level 1 by default.
• Switching the mode: Press the mode bu on to cycle through the modes of level 1, level 2, level 3, and constant
humidity, and the corresponding indicator will remain white. A er the humidifier is turned off and turned back on
again, the mode will be the last used one.
Level 2 Indicator
Level 1 Indicator
Mode Indicator Descriptions
Mode in operation
Insufficient water in the water tank
Water tank removed
• Constant humidity mode (recommended): This mode will maintain humidity at 60% RH by default. If the current humidity
does not reach 60% RH, the humidifier will switch to level 3. When the ambient humidity reaches 60% RH, the humidifier
will automatically switch to level 1. When this mode is in use, the constant humidity indicator will remain on.
Note: It is recommended to use the constant humidity mode to prevent tables from being wet due to inappropriate
mode se ings.
• UV sterilization: The humidifier has a built-in UV-C light, which is turned on simultaneously with the humidifier. A er the
humidifier is turned off, the UV-C light will turn off in two minutes.
Note: The UV-C light cover needs to be installed correctly by aligning the marks on the humidifier. Otherwise, the
humidifier cannot work properly.
• Enabling/Disabling Wi-Fi: Press the power bu on and the mode bu on simultaneously to enable or disable Wi-Fi.
The indicator of the corresponding mode remains white.
The four indicators remain red for 30 seconds, then go out.
The four indicators remain red and go out a er the water tank is reinstalled.
6
Level 3 Indicator
Constant Humidity* Indicator
* This mode is recommended.
Mode Bu on
Power Bu on